Samsung SPD-3750T, SPD-3350 Preparing Adapter and Cables, Preparing and Installing Camera Bracket

Page 14

Installing Your Camera

Preparing Adapter and Cables

–Power Adapter

Power adapter has the capacity of AC24V 2.5A.

–Video Cable

A BNC coaxial cable shown in the picture is required to connect Speed Dome’s video output terminal to the monitor.

Distance	Recommended Cable Specification
500m or shorter	5C2V Coaxial Cable
500m or longer	7C2V Coaxial Cable

–Communications Cable

For the camera to communicate with the controller, a RS-485/422 communications line is required. To ensure the quality of long distance communications and the accuracy of the overall communications, using a twisted pair cable such as UTP Cable is recommended.

*Caution!

Depending on the camera’s environment, the communications distance may vary.

Notes

• Neither the video nor communications cable is enclosed with the camera.

Installing Your Camera

Preparing and Installing Camera Bracket

For the installation guidelines for the brackets and housings, refer to the user’s manual enclosed with the bracket or housing that is sold separately.

•Camera Wiring Diagram 1

SPEED DOME CAMERA 26 User’s Manual

SPEED DOME CAMERA 27 User’s Manual

Image 14

Contents SPD-3750T/3750/3350 Page Contents Features 37x/33x Optical ZoomAbnormal heat is detected Do not install on your ownDo not handle the power plug With wet hands Insert foreign subjectsDetailed Warnings and Cautions It to physical shockComponents and Accessories Component Names and FunctionsSpeed Dome Camara and Appliances Wiring Diagram Installing Your CameraCamera Wiring Interface Board Sold Separately RX+Communication Protocol DIP Switch Settings SW2 Memo Camera Backup Settings Camera ID DIP Switch Settings SW1 Termination Settings To set up camera IDs, refer to the Camera ID Chart next Camera ID Chart 137 200 Preparing Adapter and Cables Preparing and Installing Camera BracketCamera Wiring Diagram Communications CableWiring Terminal Cables On-Ceiling Mount Type Installation ExampleAttaching Template and Installing STB-370PC Setting Up Camera DIP Switches Connecting Camera Safety Cable and Attaching CameraInterface Symbols Operating Your CameraOSD Menu Chart ATWFunctional Description Camera Setting Focus and Zoom SettingsFocus Mode Digital ZoomSpeed White BalanceMode Backlight Back Light ModeExposure IrisLevel WDRLimit HLCFour-direction Joystick Controls User Area Setting Main Menu/Camera Setting/Back Light/UserAGC Zoom ControlModes Ssnr Samsung Super Noise ReductionDay & Night DurationOthers Sequence SettingPower On Resume and MD Dwell Time Preset Clear Home PositionExecute ON/OFFSwing SEQ Group SEQPTZ Trace SettingsTour SEQ ReplayPan/Tilt Limit SettingAuto Run Area Name Area SettingArea Masking ON/OFF OFFDigital Flip Main Menu/P/T Setting/Prop. P&TProp. P/T ⑦ Auto Track1 ⑧ Auto Track2Image Holding Auto Track 1 SPD-3750T OnlyAuto Track 2 SPD-3750T Only OSD Setting MOD Alarm SettingAlarm Enable PrioritySetting 1,2 TimerFunctional Description Operating Your Camera Initialize Initialization MenuOperating Your Camera Product Specification StatusPosition Manufacturers Name Manufacturers AddressSignature Full Name PlaceSales Network