Interface Symbols
•Motion Detection Standby/Operation Display :
-When in standby mode, the "
" in the upper right of the screen blinks and then changes to "
" if motion is detected.
•Alarm Input Port Status Display :
-"①","②","③" and "④" in the upper right of the screen blink.
•Current Alarm Port Display According to Input Alarm Ports(Priority) :
-Only one of " 
"," 
","
","
" in the upper right of the screen blinks.
•Preset Number Display Settings :
-'*' : If a preset number is already available
-'H' : If a preset location is the camera’s home position
-'T' : If a preset location is the camera’s Auto Track starting point
•If an OSD Menu has Sub Menus :
-The color of the circle around the menu number shows as embossed, e.g. "①".
•If an OSD Menu Does Not Have Sub Menus :
-The circle around the menu number shows as engraved, e.g. "".
• PTZ Function Screen : |
|
|
|
|
|
| Motion Detect | ||
|
|
|
|
|
| ||||
|
| ID=001 |
|
|
|
|
|
| Alarm Input |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
Area Display |
|
|
|
| ①②③④ | ||||
|
|
|
| ||||||
|
|
| |||||||
| Area1 Area Name |
|
|
|
| ||||
|
|
|
|
| |||||
Sequence Status |
|
|
| |
|
| |||
Preset Info |
|
|
| PRESET=001 Preset Name |
|
| |||
|
|
|
| P:300 T:040 10X |
• Preset Number Setting Screen :
Preset Edit
Preset=011* (1~255)
Operating Your Camera
• OSD Menu Screen :
Camera Setting
Sub Menu Available |
|
|
| ① Focus & Zoom |
|
|
|
| |||
Sub Menu Not Available |
|
| White Balance | ATW | |
|
| ||||
|
|
|
| ||
|
|
|
| ||
Operating Your Camera
•Panning and Tilting
-Use the joystick of the controller or its direction buttons.
•Controlling Zoon
-Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the Zoom button.
•Accessing Screen Menus
-Press the Menu or OSD button on the controller.
✽For more detailed information about controls using a third party controller or a DVR, refer to the user’s manual of the product.
OSD Commands, Function Chart, and Menu Controls
This dome camera can be operated using two methods: Using hot keys on its dedicated controller, or accessing the OSD (On Screen Display) on the video output. The OSD menu commands are as follows:
Command | Function |
Move the joystick up/down/left/right | Moves the OSD menus up/down/left/right, respectively. |
Enter/Focus Far | Selects a menu and allows access to the sub menus. |
ESC/Focus Near | Cancels a command and moves back to an |
Dome Cover Setting
Before optimizing the camera focus settings for the dome cover shape, please select the dome cover type on the camera’s main menu. (Refer to Page 48)
Dome Cover Setting | Installation Type |
Outer | Dome cover type for outdoor housings except the indoor flush model. |
Inner | Default dome cover type including the indoor flush model. |
None | When using the camera without a dome cover. |
SPEED DOME CAMERA 32 User’s Manual | SPEED DOME CAMERA 33 User’s Manual |