Samsung SPD-3350, SPD-3750T user manual Setting Up Camera DIP Switches

Page 16

Installing Your Camera

3.Setting Up Camera DIP Switches

DIP switches for communication and ID protocols are located on the bottom of the camera. For the switch settings, refer to the dip switch settings of this manual.

ID(SW1)

Protocol(SW2)

5.Connecting Camera Safety Cable and Attaching Camera

Carefully attach the camera to the mount following the alignment guide marks as shown in the picture. First hook the camera's safety cable on the mount, and then attach the camera.

 

Alignment

Safety

Direction

Guides

Cable

 

Alignment

Direction

Guides

Alignment

Directions

To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.

Notes

• Make sure to first hook the camera's safety cable to the mount before proceeding. Otherwise you may be exposed to serious injury caused by a fallen camera.

Installing Your Camera

To attach or detach the camera, refer to the picture.

* Attaching the camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”.

*Detaching the camera: To detach the camera, pull the camera downward while pushing the unlock buttons on the camera upward.

Unlock Button

UNLOCK

To attach the

To detach the

camera

camera

SPEED DOME CAMERA 30 User’s Manual

SPEED DOME CAMERA 31 User’s Manual

Image 16
Contents SPD-3750T/3750/3350 Page Contents Features 37x/33x Optical ZoomDo not install on your own Do not handle the power plugAbnormal heat is detected With wet hands Insert foreign subjectsDetailed Warnings and Cautions It to physical shockComponents and Accessories Component Names and FunctionsInstalling Your Camera Camera Wiring Interface Board Sold SeparatelySpeed Dome Camara and Appliances Wiring Diagram RX+Communication Protocol DIP Switch Settings SW2 MemoCamera ID DIP Switch Settings SW1  Termination Settings Camera Backup Settings To set up camera IDs, refer to the Camera ID Chart next Camera ID Chart 137 200 Preparing and Installing Camera Bracket Camera Wiring DiagramPreparing Adapter and Cables Communications CableAttaching Template and Installing STB-370PC On-Ceiling Mount Type Installation ExampleWiring Terminal Cables Setting Up Camera DIP Switches Connecting Camera Safety Cable and Attaching CameraInterface Symbols Operating Your CameraOSD Menu Chart ATWCamera Setting Focus and Zoom Settings Focus ModeFunctional Description Digital ZoomMode White BalanceSpeed Back Light Mode ExposureBacklight IrisWDR LimitLevel HLCUser Area Setting Main Menu/Camera Setting/Back Light/User AGCFour-direction Joystick Controls Zoom ControlSsnr Samsung Super Noise Reduction Day & NightModes DurationPower On Resume and MD Dwell Time Sequence SettingOthers Preset Home Position ExecuteClear  ON/OFFSwing SEQ Group SEQSettings Tour SEQPTZ Trace ReplayAuto Run SettingPan/Tilt Limit Area Setting Area MaskingArea Name  ON/OFF OFFMain Menu/P/T Setting/Prop. P&T Prop. P/TDigital Flip ⑦ Auto Track1 ⑧ Auto Track2Image Holding Auto Track 1 SPD-3750T OnlyAuto Track 2 SPD-3750T Only OSD Setting Alarm Setting Alarm EnableMOD PrioritySetting 1,2 TimerFunctional Description Operating Your Camera Initialize Initialization MenuOperating Your Camera Product Specification StatusManufacturers Name Manufacturers Address Signature Full NamePosition PlaceSales Network