Samsung SPD-3350, SPD-3750T user manual Alarm Setting, Alarm Enable, Mod, Priority, Seq

Page 36

Functional Description

Alarm Setting

25. Alarm Setting

25.1.Setting Up Alarm Input

▶ Main Menu/Alarm Setting/Alarm Input

Functional Description

Notes

• As shown in the picture above, the Alarm Input must be entered with the Open and Close switch signals. Supplying power without entering the signals may damage the product.

Main Menu

①Camera Setting

② Sequence Setting

③ P/T Setting

④ OSD Setting

⑤ Alarm Setting

⑥ Initialize Status

➡

Alarm Setting

Alarm Enable	OFF

② Alarm Input
③ Alarm Output
④ Aux Output
➡
ALM MOD P SEQ.	NO

IN1 OFF 1	OFF
IN2 OFF 2	OFF
IN3 OFF 3	OFF
IN4 OFF 4	OFF

Alarm Enable :

- On/Off : Enables or disables the Alarm function.

MOD :

Enables selecting an Alarm Input method. - NO (Normally Open)

IN 1.2.3.4IN 1.2.3.4

	⇨
ALM GND	ALM GND
ALARM OFF	ALARM ON

- NC (Normally Closed)

IN 1.2.3.4IN 1.2.3.4

	⇨
ALM GND	ALM GND
ALARM OFF	ALARM ON

P (Priority) :

Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated,

the alarm with the highest priority activates before the others. Once the alarm is canceled, the next highest priority alarm activates.

SEQ :

Enables setting up a sequence action for the camera in response to an alarm.Available sequence actions are Preset, Swing, Group,Tour,Trace and A.Pan.

SPEED DOME CAMERA 70 User’s Manual

SPEED DOME CAMERA 71 User’s Manual

Image 36

Contents SPD-3750T/3750/3350 Page Contents Features 37x/33x Optical ZoomDo not install on your own Do not handle the power plugAbnormal heat is detected With wet hands Insert foreign subjectsDetailed Warnings and Cautions It to physical shockComponents and Accessories Component Names and FunctionsInstalling Your Camera Camera Wiring Interface Board Sold SeparatelySpeed Dome Camara and Appliances Wiring Diagram RX+Communication Protocol DIP Switch Settings SW2 MemoCamera ID DIP Switch Settings SW1 Termination Settings Camera Backup Settings To set up camera IDs, refer to the Camera ID Chart next Camera ID Chart 137 200 Preparing and Installing Camera Bracket Camera Wiring DiagramPreparing Adapter and Cables Communications CableOn-Ceiling Mount Type Installation Example Attaching Template and Installing STB-370PCWiring Terminal Cables Setting Up Camera DIP Switches Connecting Camera Safety Cable and Attaching CameraInterface Symbols Operating Your CameraOSD Menu Chart ATWCamera Setting Focus and Zoom Settings Focus ModeFunctional Description Digital ZoomWhite Balance ModeSpeed Back Light Mode ExposureBacklight IrisWDR LimitLevel HLCUser Area Setting Main Menu/Camera Setting/Back Light/User AGCFour-direction Joystick Controls Zoom ControlSsnr Samsung Super Noise Reduction Day & NightModes DurationSequence Setting Power On Resume and MD Dwell TimeOthers Preset Home Position ExecuteClear ON/OFFSwing SEQ Group SEQSettings Tour SEQPTZ Trace ReplaySetting Auto RunPan/Tilt Limit Area Setting Area MaskingArea Name ON/OFF OFFMain Menu/P/T Setting/Prop. P&T Prop. P/TDigital Flip ⑦ Auto Track1 ⑧ Auto Track2Image Holding Auto Track 1 SPD-3750T OnlyAuto Track 2 SPD-3750T Only OSD Setting Alarm Setting Alarm EnableMOD PrioritySetting 1,2 TimerFunctional Description Operating Your Camera Initialize Initialization MenuOperating Your Camera Product Specification StatusManufacturers Name Manufacturers Address Signature Full NamePosition PlaceSales Network