Samsung SPD-3750T, SPD-3350 user manual

Page 2

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING

-CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION : To prevent electric shock and risk of fire hazards:

-The installation for this apparatus should be by a qualified service person and should conform to all local codes.

-Do NOT use power sources other than Class 2 power source.

-Carefully push the unlock buttons to prevent injury due to falling of this apparatus.

This installation should be made by a qualified service person and

should conform to all local codes.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SPD-3750T/3750/3350 Page Contents Features 37x/33x Optical ZoomAbnormal heat is detected Do not install on your ownDo not handle the power plug With wet hands Insert foreign subjectsDetailed Warnings and Cautions It to physical shockComponents and Accessories Component Names and FunctionsSpeed Dome Camara and Appliances Wiring Diagram Installing Your CameraCamera Wiring Interface Board Sold Separately RX+Communication Protocol DIP Switch Settings SW2 Memo Camera Backup Settings Camera ID DIP Switch Settings SW1 Termination Settings To set up camera IDs, refer to the Camera ID Chart next Camera ID Chart 137 200 Preparing Adapter and Cables Preparing and Installing Camera BracketCamera Wiring Diagram Communications CableWiring Terminal Cables On-Ceiling Mount Type Installation ExampleAttaching Template and Installing STB-370PC Setting Up Camera DIP Switches Connecting Camera Safety Cable and Attaching CameraInterface Symbols Operating Your CameraOSD Menu Chart ATWFunctional Description Camera Setting Focus and Zoom SettingsFocus Mode Digital ZoomSpeed White BalanceMode Backlight Back Light ModeExposure IrisLevel WDRLimit HLCFour-direction Joystick Controls User Area Setting Main Menu/Camera Setting/Back Light/UserAGC Zoom ControlModes Ssnr Samsung Super Noise ReductionDay & Night DurationOthers Sequence SettingPower On Resume and MD Dwell Time Preset Clear Home PositionExecute  ON/OFFSwing SEQ Group SEQPTZ Trace SettingsTour SEQ ReplayPan/Tilt Limit SettingAuto Run Area Name Area SettingArea Masking  ON/OFF OFFDigital Flip Main Menu/P/T Setting/Prop. P&TProp. P/T ⑦ Auto Track1 ⑧ Auto Track2Image Holding Auto Track 1 SPD-3750T OnlyAuto Track 2 SPD-3750T Only OSD Setting MOD Alarm SettingAlarm Enable PrioritySetting 1,2 TimerFunctional Description Operating Your Camera Initialize Initialization MenuOperating Your Camera Product Specification StatusPosition Manufacturers Name Manufacturers AddressSignature Full Name PlaceSales Network
Top Page Image Contents