Functional Description
6.SSNR (Samsung Super Noise Reduction)
▶ Main Menu/Camera Setting/SSNR
Functional Description
7.Day & Night
▶ Main Menu/Camera Setting/Day & Night
Main Menu
①Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize Status
SSNR significantly reduces the amount of low luminance noise.
-Off : Disables the noise reduction function.
-Low : Reduces only a small amount of noise, but generates almost no afterimage.
-Medium :The most commonly used mode. Reduces a suitable amount of noise while generating a subtle afterimage.
-High : Reduces noise significantly, but generates obvious afterimages.
Main Menu
①Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize Status
➡
The Day & Night function allows the camera to switch between the Color and B/W modes.
Modes :
- Auto : Operates in Color mode most times, and switches |
to B/W mode if a low light level is detected during |
nighttime. |
- Color : Operates in Color mode at all times. |
- B/W : Operates in B/W mode at all times. By using the |
Burst On/Off sub menu, burst signals can be |
retained or disabled. |
➡
Camera Setting
① Focus & Zoom |
|
White Balance | ATW |
③ Exposure |
|
④ Back Light | OFF |
AGC | Medium |
SSNR | Medium |
⑦ Day & Night |
|
⑧ Others |
|
Camera Setting
① Focus & Zoom |
|
White Balance | ATW |
③ Exposure |
|
④ Back Light | OFF |
AGC | Medium |
SSNR | Medium |
|
|
⑦ Day & Night |
|
⑧ Others |
|
➡
Day & Night
① Mode | COLOR |
Duration | FAST |
③ Dwell Time | 0.5 SEC |
Notes |
|
✽ If the camera is in B/W mode and connected to equipment |
that requires external sync through burst signals, set the |
Burst On/Off option to “On.” |
Duration :
The camera’s light sensitivity is adjustable as in the chart below.The camera’s ambient light diversion performance may vary depending on its environment.
| Color | B/W | |
Fast | 2.5 Lux | 4 | Lux |
|
|
|
|
Slow | 0.8 Lux | 6 | Lux |
Dwell Time :
The duration of both the lighting conditions can be customized to let the camera divert between the daytime and nighttime settings.
Notes
• SSNR is disabled when the AGC mode is turned off.
• The Auto mode is disabled when AGC is turned off. This function is only available when the Color or B/W mode is selected.
• Using B/W mode under sunlight or a halogen lamp may decrease the focusing performance.
SPEED DOME CAMERA 46 User’s Manual | SPEED DOME CAMERA 47 User’s Manual |