18 en Installation | IP Camera 200 Series |
|
|
3.7Mounting
Camera Outline
Cut Line
x4
T4 (Ø3.3 mm)
Torque 8
x4
Figure 3.5 Mounting the camera
To mount the camera to a wall or ceiling:
1.Stick the supplied installation paper sticker to the surface taking care to orientate it correctly.
2.Drill four holes with a diameter of 6 mm.
3.Insert the supplied plugs into the holes.
4.Attach the camera and base unit securly to the surface using the four supplied T4 screws.
CAUTION!
Do not point the camera/lens into direct sunlight as this may damage the sensors.
Installation Manual | Bosch Security Systems |