Bosch Appliances NDN-265-PIO installation manual Establishing the connection, Protected network

Page 25

IP Camera 200 Series

Browser connection en 25

 

 

4.2Establishing the connection

The camera must be assigned a valid IP address to operate on your network. The default address pre-set at the factory is

192.168.0.1

1.Start the Web browser.

2.Enter the IP address of the camera as the URL.

Note:

If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 Bosch VMS connections are supported.

4.2.1Password protection in camera

A camera offers the option of limiting access across various authorization levels. If the camera is password-protected, a message to enter the password appears.

1.Enter the user name and the associated password in the appropriate fields.

2.Click OK. If the password is correct, the desired page is displayed.

4.3Protected network

If a RADIUS server is used for network access control (802.1x authentication), the camera must be configured first. To configure the camera for a Radius network, connect it directly to a PC via a crossed network cable and configure the two parameters, Identity and Password. Only after these have been configured can communication with the camera via the network occur.

Bosch Security Systems

Installation Manual

AM18-Q0616 v1 2012.02

Image 25
Contents IP Camera 200 Series Page Table of Contents Technical Data MaintenanceSafety precautions SafetyImportant safety instructions FCC & Ices Information FCC & Ices complianceBosch notices UL certificationDisclaimer More informationCopyrights Introduction FeaturesCD ROM UnpackingDisassembly InstallationMicroSDHC card RJ45 Ethernet PoE Network and power connectorDC power connection Power connectionFunction Wire Color I/O connectorAudio connectors Audio connectorsMounting the camera MountingCamera set-up Camera positioning IP Camera 200 Series Installation en Focal length and focus Resetting the camera System requirements Browser connectionEstablishing the connection Password protection in cameraProtected network Resolving problems TroubleshootingCustomer service Malfunction Possible causes SolutionRepairs MaintenanceTransfer and disposal Specifications Technical DataIP Camera 200 SeriesTechnical Data en Accessories Page Bosch Security Systems