Bosch Appliances NDN-265-PIO installation manual Focal length and focus

Page 22

22 en Installation	IP Camera 200 Series

3.8.2Focal length and focus

Adjust the focal length (zoom) and focus as follows:

1.To set the field of view of the varifocal lens, loosen the focal length screw and turn the mechanism until the required view is displayed on the monitor (Image goes out of focus.)

2.Focus the image on the monitor by loosening the focus screw with the tool provided and turning the mechanism until the image is in focus.

3.Readjust the focal length if necessary.

4.Repeat these two adjustments until the desired view is in focus.

5.Tighten both screws.

1.Focus

2.Focal length (zoom)

AM18-Q0616 v1 2012.02

Installation Manual

Bosch Security Systems

Image 22

Contents IP Camera 200 Series Page Table of Contents Maintenance Technical DataSafety Safety precautionsImportant safety instructions FCC & Ices compliance FCC & Ices InformationDisclaimer UL certificationBosch notices More informationCopyrights Features IntroductionUnpacking CD ROMInstallation DisassemblyMicroSDHC card Network and power connector RJ45 Ethernet PoEPower connection DC power connectionI/O connector Function Wire ColorAudio connectors Audio connectorsMounting Mounting the camera Camera set-up Camera positioning IP Camera 200 Series Installation en Focal length and focus Resetting the camera Browser connection System requirementsEstablishing the connection Password protection in cameraProtected network Customer service TroubleshootingResolving problems Malfunction Possible causes SolutionRepairs MaintenanceTransfer and disposal Technical Data SpecificationsIP Camera 200 SeriesTechnical Data en Accessories Page Bosch Security Systems