IP Camera 200 Series | Advanced Mode en 41 |
|
|
5.Click one of the entries in the table to make changes. The entry is highlighted.
6.Click Delete to remove the entry from the table.
7.Choose other values from the list boxes under the table, to change the selected entry. Changes are immediate.
8.If there are empty lines at the bottom of the table, for example after deletions, add new data by marking the row and selecting values from the list boxes.
9.When finished, click OK to save and activate the table.
Note:
If a table is not created, there is no automatic switching. When editing the table, note that values occur in linked pairs (DST start and end dates).
Time server IP address
The camera can receive the time signal from a time server using various time server protocols and then use it to set the internal clock. The device polls the time signal automatically once every minute. Enter the IP address of a time server.
Time server type
Select the protocol that is supported by the selected time server. It is recommended to select the SNTP server protocol. This protocol provides high accuracy and is required for special applications and future function extensions. Select Time server if the server uses the RFC 868 protocol.
6.2.4Display Stamping
Various overlays or stamps in the video image provide important supplementary information. These overlays can be enabled individually and arranged on the image in a clear manner.
Camera name stamping
This field sets the position of the camera name overlay. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information.
Bosch Security Systems | Installation and Operation Manual |