96 en Operation via the browser | IP Camera 200 Series |
|
|
7.1.5Saving snapshots
Individual images from the video sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer's hard drive.
Click the camera icon 
to save single images. The storage location depends on the configuration of the camera.
7.1.6Recording video sequences
Sections of the video sequence that is currently being shown on the Livepage can be saved on the computer's hard drive. The sequences are recorded at the resolution specified in the encoder configuration. The storage location depends on the configuration of the camera.
1.Click the recording icon 
to record video sequences.
–Saving begins immediately. The red dot on the icon indicates that a recording is in progress.
2.Click the recording icon again to stop recording.
Play back saved video sequences using the Player from
Bosch Security Systems.
7.1.7Running recording program
The hard drive icon below the camera images on the Livepage changes during an automatic recording.
The icon lights up and displays a moving graphic 
to indicate a running recording. If no recording is taking place, a static icon is displayed.
7.1.8Audio communication
Audio can be sent and received via the Livepage if the active monitor and the remote station of the camera support audio.
1.Press and hold the F12 key to send an audio signal to the camera.
2.Release the key to stop sending audio.
| Installation and Operation Manual | Bosch Security Systems |