Axis Communications P5534 user manual Events

Page 31

AXIS P5534 PTZ Dome Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Applications — use installed applications to trigger the rule, see Applications, on page 30.

•Detectors

-Audio Detection — trigger the rule when audio is detected, see Audio detection, on page 29.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 28.

•Hardware

-Fan — trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance notifications.

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

•Input Signal

-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O Ports, on page 44.

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View page, on page 9 . This can for example be used to validate actions during product installation and configuration.

•PTZ

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked — trigger the rule if the storage device is locked (write protected).

•System

-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence — trigger the rule periodically, see Recurrences, on page 34. This can for example be used to upload an image every 5 minutes.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Axis P5534 PTZ Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P5534 PTZ Dome Network Camera Table of ContentsPerformance considerations Symptoms, possible causes and remedial actionsHardware overview ConnectorsHardware overview Midspan LED indicators LED indicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Accessing the productAccessing the product Access from a browserNetwork TCP/IP Advanced Access from the InternetSet the root password Live ViewAxis Media Control viewer toolbar Controls on the Live ViewAMC Audio controls PTZ ControlsAxis P5534 PTZ Dome Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Pixel Counter Video and AudioVideo and Audio Video Stream264 Camera SettingsStream Profiles ImageWhite balance Exposure SettingsImage settings Image AppearanceOverlay image Audio SettingsOverlay Privacy MaskG711 G726 Audio InputAudio Output Audio ClipsLive View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsAxis P5534 PTZ Dome Network Camera Gatekeeper Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomLimits Guard TourOsdi Zones AdvancedControl Queue Operator Same as administrator but with lower priorityControls Motion Detection Set up motion detectionDetectors DetectorsAudio detection Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules PTZ ControlGo to Events Recipients and click Add RecipientsSchedules Recipient Use with actionGo to Events Recurrences and click Add RecurrencesContinuous recording RecordingsRecordings Recording ListAxis P5534 PTZ Dome Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to factory default settingsScripting File UploadMulti-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications Connector DC power input Connection diagramChecking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyNo images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Maintenance Installation aidsMemory Power ConnectorsPerformance considerations Ver M1.12 Axis P5534 PTZ Dome Network Camera
Top Page Image Contents