Axis Communications P5534 Network, Basic TCP/IP Settings, IPv4 Address Configuration, ARP/Ping

Page 39

AXIS P5534 PTZ Dome Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 40.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 40.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 46) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Axis P5534 PTZ Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P5534 PTZ Dome Network Camera Table of ContentsPerformance considerations Symptoms, possible causes and remedial actionsConnectors Hardware overviewHardware overview LED indicators Midspan LED indicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Accessing the productAccessing the product Access from a browserNetwork TCP/IP Advanced Access from the InternetSet the root password Live ViewAxis Media Control viewer toolbar Controls on the Live ViewAMC Audio controls PTZ ControlsAxis P5534 PTZ Dome Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Pixel Counter Video and AudioVideo and Audio Video Stream264 Camera SettingsStream Profiles ImageWhite balance Exposure SettingsImage settings Image AppearanceOverlay image Audio SettingsOverlay Privacy MaskG711 G726 Audio InputAudio Output Audio ClipsDefault viewer for browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsAxis P5534 PTZ Dome Network Camera Gatekeeper Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomLimits Guard TourOsdi Zones AdvancedOperator Same as administrator but with lower priority Control QueueControls Motion Detection Set up motion detectionDetectors DetectorsAudio detection Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules PTZ ControlGo to Events Recipients and click Add RecipientsSchedules Recipient Use with actionGo to Events Recurrences and click Add RecurrencesContinuous recording RecordingsRecordings Recording ListAxis P5534 PTZ Dome Network Camera Users System OptionsSystem Options SecurityDate & Time IeeeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to factory default settingsScripting File UploadMulti-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications Connector DC power input Connection diagramChecking the firmware TroubleshootingTroubleshooting Emergency recovery procedureSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyNo images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Maintenance Installation aidsMemory Power ConnectorsPerformance considerations Ver M1.12 Axis P5534 PTZ Dome Network Camera
Top Page Image Contents