Axis Communications P5534E user manual Media Streams, How to Stream H.264, Axis Media Control AMC

Page 12

AXIS P5534–E PTZ Dome Network Camera

Media Streams

Media Streams

The Axis product provides several video stream formats. Your requirements and the properties of your network will determine the type you use.

The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream profiles. Other applications and clients can access video streams directly, without going via the Live View page.

How to Stream H.264

H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared with the Motion JPEG format and as much as 50% more than the MPEG-4 standard. This means that much less network bandwidth and storage space are required for a video file. Or seen another way, much higher video quality can be achieved for a given bit rate.

Deciding which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. The available options in AXIS Media Control are:

Unicast RTP

This unicast method (RTP over UDP) is used

 

 

 

for live unicast video, especially when it is

 

 

 

important to always have an up-to-date video

 

 

stream, even if some frames are dropped.

 

Unicasting is used for video-on-demand

RTP over RTSP

This unicast method (RTP tunneled over RTSP)

transmission so that there is no video traffic

on the network until a client connects and

 

is useful as it is relatively simple to configure

 

 

 

requests the stream.

 

firewalls to allow RTSP traffic.

 

 

 

Note that there are a maximum of 20

 

 

 

RTP over RTSP over HTTP

This unicast method can be used to traverse

 

simultaneous unicast connections.

 

firewalls. Firewalls are commonly configured

to

 

 

allow the HTTP protocol, thus allowing RTP to

 

 

be tunneled.

 

 

 

 

 

Multicast RTP

This method (RTP over UDP) should be used for live multicast video. The video stream is always

 

up-to-date, even if some frames are dropped.

 

 

Multicasting provides the most efficient usage of bandwidth when there are large numbers of

 

clients viewing simultaneously. A multicast cannot however, pass a network router unless the

 

router is configured to allow this. It is not possible to multicast over the Internet, for example.

 

Note also that all multicast viewers count as one unicast viewer in the maximum total of 20

 

simultaneous connections.

 

 

 

 

 

 

AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements.

Note

H.264 is licensed technology. The Axis product includes one H.264 viewing client license. Installing additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller.

MJPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream. The recommended method of accessing Motion JPEG live video from the Axis product is to use the AXIS Media Control in Internet Explorer in Windows.

AXIS Media Control (AMC)

AXIS Media Control (AMC) in Internet Explorer in Windows is the recommended method of accessing live video from the Axis product.

12

Image 12
Contents Axis P5534-E PTZ Dome Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P5534-E PTZ Dome Network CameraConnectors and Buttons Network ConnectorFor technical specifications, see Hardware OverviewLED Indicators Midspan LED IndicatorsSD Card Slot Control ButtonAccess the Product Access from a BrowserAccess from the Internet Set the Root Password Live ViewClick Create self-signed certificate Go to Setup Events Controls on the Live ViewAxis Media Control viewer toolbar Manual TriggerPTZ Controls Axis P5534-E PTZ Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P5534-E PTZ Dome Network Camera Set Up the Product Basic SetupSet Up Video Streams Click Save to apply the new settingsVideo Pixel CounterStream Profiles 264Camera Settings Exposure SettingsImage Appearance White BalanceImage Settings Date/Time Formats in the online help To enable overlaysOverlay Overlay ImagePrivacy Mask To upload an overlay imageGo to Video Overlay Image Configure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons Preset Positions PTZ Pan Tilt ZoomGatekeeper Guard Tour Osdi ZonesAdvanced LimitsControls Operator Same as administrator but with lower priority Control QueueSet Up Motion Detection Windows DetectorsMotion Detection Motion Detection ParametersDefault values High level 100%Medium level 50% Low level 0%Install Application Go to Setup ApplicationsApplications Application LicensesAxis P5534-E PTZ Dome Network Camera Set Up Action Rules EventsConvert Event Types to Action Rules Go to Events Action Rules and click AddTriggers ActionsAdd Recipients Create SchedulesRecipient Types Set Up Recurrences Go to Events Recurrences and click AddRecordings Recording ListContinuous Recording Go to Recordings ListTo log in again and be configured to use this functionality System OptionsSecurity UsersDate & Time IeeeCertificates CA CertificateBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4Linux/Unix syntax Linux/Unix exampleAdvanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPQoS Quality of Service UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMStorage RTP/H.264Bonjour SD CardMaintenance Network ShareFormat SD Card Go to System Options Storage Click Network ShareSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadAxis P5534-E PTZ Dome Network Camera Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Key framesStorage and disk management problems Condensation in domeTechnical Specifications Function/group Specifications System Application Maintenance Installation aidsMemory Power ConnectorsFunction/group Specifications Video Performance ConsiderationsM2.4