Axis Communications P5534E user manual Recordings, Recording List, Continuous Recording

Page 35

AXIS P5534–E PTZ Dome Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 35.

•To set up action rules, see page 31.

•To access recordings, see Recording List on page 35.

•To configure camera controlled storage, see Storage on page 43.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. For information about storage devices, see Storage on page 43. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings.

If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select the type of storage device from the Storage list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Axis P5534-E PTZ Dome Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis P5534-E PTZ Dome Network Camera Table of ContentsHardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeControl Button LED IndicatorsMidspan LED Indicators SD Card SlotAccess from the Internet Access the ProductAccess from a Browser Click Create self-signed certificate Set the Root PasswordLive View Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbarPTZ Controls Axis P5534-E PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P5534-E PTZ Dome Network Camera Basic Setup Set Up the ProductPixel Counter Set Up Video StreamsClick Save to apply the new settings Video264 Stream ProfilesWhite Balance Camera SettingsExposure Settings Image AppearanceOverlay Image Image SettingsDate/Time Formats in the online help To enable overlays OverlayGo to Video Overlay Image Privacy MaskTo upload an overlay image Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsOutput Buttons Go to Setup Live View ConfigUser Defined Links Gatekeeper Preset PositionsPTZ Pan Tilt Zoom Limits Guard TourOsdi Zones AdvancedControls Control Queue Operator Same as administrator but with lower priorityMotion Detection Parameters Set Up Motion Detection WindowsDetectors Motion DetectionLow level 0% Default valuesHigh level 100% Medium level 50%Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P5534-E PTZ Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action Rules Actions TriggersRecipient Types Add RecipientsCreate Schedules Go to Events Recurrences and click Add Set Up RecurrencesGo to Recordings List RecordingsRecording List Continuous RecordingUsers To log in again and be configured to use this functionalitySystem Options SecurityCA Certificate Date & TimeIeee CertificatesNetwork Basic TCP/IP SettingsLinux/Unix example Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 Linux/Unix syntaxHost Name Configuration Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM Smtp emailSD Card StorageRTP/H.264 BonjourGo to System Options Storage Click Network Share MaintenanceNetwork Share Format SD CardLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis P5534-E PTZ Dome Network Camera Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserKey frames Problems with streaming H.264Video and image problems, general Video Camera SettingsCondensation in dome Storage and disk management problemsTechnical Specifications Connectors Function/group Specifications System ApplicationMaintenance Installation aids Memory PowerPerformance Considerations Function/group Specifications VideoM2.4
Top Page Image Contents