Axis Communications P5534E user manual Controls

Page 25

AXIS P5534–E PTZ Dome Network Camera

PTZ (Pan Tilt Zoom)

Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed.

When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is useful then the view is zoomed in on an object.

When Enable Auto-flipis selected, the Axis product will simulate continuous pan movement in the same direction, i.e. the camera will pan the full 360 degrees, even though there is a mechanical stop at ±180 degrees.

When Enable movement prediction is selected, the Axis product will attempt to predict the new position in the pan movement, after compensating for the slight delay while the camera changes direction after an auto-flip. This is useful for tracking moving objects or persons when using the joystick or emulated joystick mode.

See the online help for more information.

Controls

Advanced PTZ settings can be configured under PTZ > Advanced > Controls.

The Panel Shortcut Command Buttons list shows the user-defined buttons that can be accessed from the Live View page’s Ctrl panel. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface. Click Add to add a new shortcut command button.

The following PTZ controls are enabled by default:

Pan control

Tilt control

Zoom control

Focus control

Iris control

To disable specific controls, deselect the options under Enable/Disable controls.

25

Image 25
Contents Axis P5534-E PTZ Dome Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis P5534-E PTZ Dome Network Camera Table of ContentsNetwork Connector Connectors and ButtonsFor technical specifications, see Hardware OverviewMidspan LED Indicators LED IndicatorsSD Card Slot Control ButtonAccess from a Browser Access the ProductAccess from the Internet Live View Set the Root PasswordClick Create self-signed certificate Controls on the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerPTZ Controls Axis P5534-E PTZ Dome Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P5534-E PTZ Dome Network Camera Basic Setup Set Up the ProductClick Save to apply the new settings Set Up Video StreamsVideo Pixel Counter264 Stream ProfilesExposure Settings Camera SettingsImage Appearance White BalanceDate/Time Formats in the online help To enable overlays Image SettingsOverlay Overlay ImageTo upload an overlay image Privacy MaskGo to Video Overlay Image Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons PTZ Pan Tilt Zoom Preset PositionsGatekeeper Osdi Zones Guard TourAdvanced LimitsControls Control Queue Operator Same as administrator but with lower priorityDetectors Set Up Motion Detection WindowsMotion Detection Motion Detection ParametersHigh level 100% Default valuesMedium level 50% Low level 0%Go to Setup Applications Install ApplicationApplications Application LicensesAxis P5534-E PTZ Dome Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddActions TriggersCreate Schedules Add RecipientsRecipient Types Go to Events Recurrences and click Add Set Up RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListSystem Options To log in again and be configured to use this functionalitySecurity UsersIeee Date & TimeCertificates CA CertificateNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 Axis Internet Dynamic DNS ServiceLinux/Unix syntax Linux/Unix exampleDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceSmtp email UPnPTMRTP/H.264 StorageBonjour SD CardNetwork Share MaintenanceFormat SD Card Go to System Options Storage Click Network ShareSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis P5534-E PTZ Dome Network Camera Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesCondensation in dome Storage and disk management problemsTechnical Specifications Maintenance Installation aids Function/group Specifications System ApplicationMemory Power ConnectorsPerformance Considerations Function/group Specifications VideoM2.4