Axis Communications M1114E Set Up Motion Detection Windows, Motion Detection Parameters

Page 27

AXIS M1114–E

Detectors

Note

Using the motion detection feature may decrease the product’s overall performance.

The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window.

Set Up Motion Detection Windows

To set up a motion detection Include Window, follow these instructions:

1.Go to Detectors > Motion Detection.

2.Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name.

3.Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired position) of the window.

4.Adjust the Object Size, History and Sensitivity profile sliders (see Motion Detection Parameters for details). Any detected motion within an active window is indicated by red peaks in the Activity window.

5.Click Save.

To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the include window.

To delete an include or exclude window, select the window in the list of windows and click Del.

Motion Detection Parameters

The parameters controlling motion detection are described in the table below:

Parameter

Object Size

History

Sensitivity

 

 

 

 

Description

Object size relative to window

Object memory length.

Difference in luminance

 

size.

 

between background and

 

 

 

object.

 

 

 

 

High level (100%)

Only very large objects trigger

An object that appears in

Ordinary colored objects on

 

motion detection.

the window triggers motion

ordinary backgrounds trigger

 

 

detection for a long time

motion detection.

 

 

before it is considered as

 

 

 

non-moving.

 

 

 

 

 

Medium level (50%)

 

 

A large difference in luminance

 

 

 

is required to trigger motion

 

 

 

detection.

 

 

 

 

Low level (0%)

Even very small objects trigger

An object that appears in

Only very bright objects on

 

motion detection.

the window triggers motion

a dark background trigger

 

 

detection only for a very short

motion detection.

 

 

time before it is considered as

 

 

 

non-moving.

 

 

 

 

 

Recommended values

5–15%

60–90%

75–95%

 

 

 

 

Default values

15%

90%

90%

 

 

 

 

27

Image 27
Contents Axis M1114-E Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis M1114-E Table of ContentsPerformance Considerations Control Button Connectors and ButtonsNetwork Connector Hardware OverviewNetwork LED Indication LED IndicatorsPower LED Indication Status LED IndicationSet the Root Password Access the ProductAccess from a Browser Access from the InternetSet Power Line Frequency Live ViewClick Create self-signed certificate Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbarPTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis M1114-E Back Focus Adjustment Set Up the ProductBasic Setup Focus AdjustmentImage VideoVideo Stream Pixel CounterClick Save to apply the new settings Stream Profiles264 Image Appearance Camera SettingsExposure Settings View AreaGo to Video Overlay Image OverlayOverlay Image Go to Video Video Stream and select the Image tabGo to Events Action Rules Use Overlay Text in an Action RulePrivacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsUser Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Controls Operator Same as administrator but with lower priorityAdvanced Control QueueGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAxis M1114-E Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis M1114-E Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesActions TriggersRecipient Use with action Add RecipientsRecipient Types Go to Events Recipients and click AddGo to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create SchedulesAxis M1114-E Go to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Axis Internet Dynamic DNS ServiceHost Name Configuration Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationFTP NAT traversal port mapping for IPv4RTP/H.264 QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMNetwork Share MaintenanceStorage BonjourLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingCheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserVideo Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalReformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Power Function/group Specifications System ApplicationInstallation Maintenance General CasingPerformance Considerations M2.5