Axis Communications M3024LVE user manual Storage, RTP/H.264, Bonjour, SD Card

Page 44

AXIS M3024–LVE Network Camera

System Options

RTP/H.264

The RTP port range and multicast settings are configured under System Options > Network > RTP.

The RTP port range defines the range of ports from which the video ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.

Select Always Multicast Video to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

SD Card

The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 10.

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The Axis product supports SD cards with the following file systems:

ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

vFAT — most SD cards are pre-formatted with vFAT when purchased.

If required, the SD card can be manually formatted to the desired file system. To format the SD card:

1.Insert the SD card in the SD card slot.

2.Go to System Options > Storage and click SD Card.

3.Click Format and select the desired file system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Go to System Options > Storage and click SD Card.

2.Click Unmount.

3.The card can now be removed.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

44

Image 44
Contents Axis M3024-LVE Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis M3024-LVE Network CameraConnectors and Buttons Network ConnectorHardware Overview Hardware OverviewLED Indicators ConnectorSD Card Slot Control ButtonAccess from a Browser Accessing the ProductAccessing the Product Click Create self-signed certificate Accessing the Product Access from the InternetSet the Root Password Controls on the Live View Set Power Line FrequencyLive View Manual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ Controls How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M3024-LVE Network Camera Basic Setup Setting Up the ProductSetting Up the Product Pixel Counter Setting Up the Product VideoVideo Stream 264 Stream ProfilesImage Camera Settings Exposure SettingsImage Appearance White BalanceBuilt-in IR Illuminations LEDs View AreaOverlay Go to Video Overlay Image Privacy MaskOverlay Image Default Viewer for Browsers Live View ConfigLive View Config Viewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis M3024-LVE Network Camera Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom AdvancedAxis M3024-LVE Network Camera Detectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionDefault values Medium level 50%Low level 0% Recommended valuesInstall Application ApplicationsApplications Application LicensesAxis M3024-LVE Network Camera Events EventsSetting Up an Action Rule TimePTZ Control Go to Events Action Rules and click AddRecurrences RecipientsSchedules Go to Events Recurrences and click Add Recordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates Date & TimeIeee Basic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service Linux/Unix syntaxLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPQoS Quality of Service UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMStorage RTP/H.264Bonjour SD CardMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigSystem Options Advanced ScriptingTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Problem Retrieving Additional Video Streams Technical Specifications Technical SpecificationsFunction/group Specifications System Application PowerConnectors DimensionsConnectors Function/group Specifications Weight 820 g 12.8 lb IncludedConnector Function Pin SpecificationsPerformance Considerations M2.4

M3024LVE specifications

Axis Communications M3024LVE is a compact, high-performance network camera designed for versatile indoor and outdoor surveillance applications. With its sleek and discreet design, this camera is an optimal choice for businesses and public spaces that require reliable security without compromising aesthetics.

One of the key features of the M3024LVE is its impressive image quality. Equipped with a 2 megapixel sensor, this camera offers a resolution of 1920 x 1080 pixels, delivering clear and detailed images. The camera supports H.264 and Motion JPEG video compression formats, which ensures smooth streaming and efficient storage without sacrificing video quality. This capability is particularly beneficial for organizations with limited storage resources, allowing them to conserve bandwidth while maintaining high-resolution video.

Another notable characteristic of the M3024LVE is its built-in infrared (IR) illumination. This feature allows the camera to capture clear images in complete darkness, enhancing its effectiveness in low-light conditions. With a range of up to 30 meters, the IR capability ensures that critical surveillance areas are monitored around the clock. This makes the M3024LVE an excellent choice for both day and night monitoring in a variety of environments.

The M3024LVE is also designed with robust weather-resistant capabilities. With an IP66 and NEMA 4X rating, it can withstand harsh weather conditions, including rain, snow, and dust. This durability makes it suitable for outdoor installations, ensuring that users can rely on its performance regardless of the environmental challenges.

In addition to its physical characteristics, the M3024LVE integrates advanced video analytics, enhancing its functionality. Features such as motion detection, audio detection, and tampering alarm enable users to receive real-time alerts based on specific events or activities, facilitating proactive monitoring.

Moreover, Axis Communications places a strong emphasis on cybersecurity, and the M3024LVE is no exception. The camera includes several security features such as secure access, HTTPS encryption, and the ability to implement user access controls. This ensures that only authorized personnel can access the camera feed, protecting sensitive surveillance data from potential threats.

Overall, the Axis Communications M3024LVE combines high image quality, robust weather resistance, and advanced analytics in a compact design, making it an ideal solution for a myriad of surveillance needs in both indoor and outdoor environments.