Axis Communications M3024LVE user manual LED Indicators, Connector, SD Card Slot, Control Button

Page 6

AXIS M3024–LVE Network Camera

Hardware Overview

NOTICE

The product shall be connected using a shielded network cable (STP) or an optical fiber cable. All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC), on page 2 .

I/O Connector

Use with external devices in combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:

Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > Ports & Devices) if the alarm device is activated.

Digital input – An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under System Options > Ports & Devices).

SD Card Slot

A microSD card (not included) can be used for local recording with removable storage. For more information, seeTechnical Specifications, on page 52.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

Resetting the product to factory default settings. See page 47.

Connecting to an AXIS Video Hosting System service. See page 40. To connect, press and hold the button for about 1 second until the Status LED flashes green.

Connecting to AXIS Internet Dynamic DNS Service. See page 40. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED

Color

Indication

 

 

 

Status

Unlit

Connection and normal operation

 

 

 

 

Amber

Steady during startup. Flashes during firmware upgrade.

 

 

 

 

Amber/red

Flashes amber/red if network connection is unavailable or lost.

 

 

 

 

Red

Flashes red for firmware upgrade failure.

 

 

 

 

Green

Shows steady green for 10 seconds for normal operation after restart.

 

 

 

Note

The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

The Status LED can be configured to flash while an event is active.

The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

6

Image 6
Contents Axis M3024-LVE Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M3024-LVE Network CameraHardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewSD Card Slot LED IndicatorsConnector Control ButtonAccessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordClick Create self-signed certificate Set Power Line Frequency Live ViewControls on the Live View Go to Setup Events Axis Media Control viewer toolbarManual Trigger PTZ Controls Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M3024-LVE Network Camera Setting Up the Product Setting Up the ProductBasic Setup Setting Up the Product Video Video StreamPixel Counter Stream Profiles Image264 Image Appearance Camera SettingsExposure Settings White BalanceView Area OverlayBuilt-in IR Illuminations LEDs Privacy Mask Overlay ImageGo to Video Overlay Image Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis M3024-LVE Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom AdvancedAxis M3024-LVE Network Camera Camera Tampering DetectorsDetectors Motion DetectionGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionLow level 0% Default valuesMedium level 50% Recommended valuesApplications Install ApplicationApplications Application LicensesAxis M3024-LVE Network Camera Events EventsPTZ Control Setting Up an Action RuleTime Go to Events Action Rules and click AddRecipients SchedulesRecurrences Go to Events Recurrences and click Add Recording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersDate & Time IeeeCertificates Basic TCP/IP Settings NetworkLinux/Unix example Axis Internet Dynamic DNS ServiceLinux/Unix syntax Axis Video Hosting System AvhsNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPSmtp email QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMBonjour StorageRTP/H.264 SD CardNetwork Share MaintenancePorts & Devices PortsSystem Overview SupportSupport Overview Logs & ReportsSystem Options Advanced Reset to Factory Default SettingsPlain Config ScriptingEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Problem Retrieving Additional Video Streams Technical Specifications Technical SpecificationsConnectors Function/group Specifications System ApplicationPower DimensionsConnector ConnectorsFunction/group Specifications Weight 820 g 12.8 lb Included Function Pin SpecificationsPerformance Considerations M2.4

M3024LVE specifications

Axis Communications M3024LVE is a compact, high-performance network camera designed for versatile indoor and outdoor surveillance applications. With its sleek and discreet design, this camera is an optimal choice for businesses and public spaces that require reliable security without compromising aesthetics.

One of the key features of the M3024LVE is its impressive image quality. Equipped with a 2 megapixel sensor, this camera offers a resolution of 1920 x 1080 pixels, delivering clear and detailed images. The camera supports H.264 and Motion JPEG video compression formats, which ensures smooth streaming and efficient storage without sacrificing video quality. This capability is particularly beneficial for organizations with limited storage resources, allowing them to conserve bandwidth while maintaining high-resolution video.

Another notable characteristic of the M3024LVE is its built-in infrared (IR) illumination. This feature allows the camera to capture clear images in complete darkness, enhancing its effectiveness in low-light conditions. With a range of up to 30 meters, the IR capability ensures that critical surveillance areas are monitored around the clock. This makes the M3024LVE an excellent choice for both day and night monitoring in a variety of environments.

The M3024LVE is also designed with robust weather-resistant capabilities. With an IP66 and NEMA 4X rating, it can withstand harsh weather conditions, including rain, snow, and dust. This durability makes it suitable for outdoor installations, ensuring that users can rely on its performance regardless of the environmental challenges.

In addition to its physical characteristics, the M3024LVE integrates advanced video analytics, enhancing its functionality. Features such as motion detection, audio detection, and tampering alarm enable users to receive real-time alerts based on specific events or activities, facilitating proactive monitoring.

Moreover, Axis Communications places a strong emphasis on cybersecurity, and the M3024LVE is no exception. The camera includes several security features such as secure access, HTTPS encryption, and the ability to implement user access controls. This ensures that only authorized personnel can access the camera feed, protecting sensitive surveillance data from potential threats.

Overall, the Axis Communications M3024LVE combines high image quality, robust weather resistance, and advanced analytics in a compact design, making it an ideal solution for a myriad of surveillance needs in both indoor and outdoor environments.