Axis Communications AXIS Q1755 Controls, Control Queue Settings, Enable/Disable controls

Page 24

AXIS Q1755/-E - PTZ (Pan Tilt Zoom)

Controls

Panel Shortcut Command Buttons

Here are the controls for creating and saving shortcut command buttons. These buttons can provide direct access to various built-in auxiliary commands provided by the PT driver. The buttons are displayed in the Control Panel, which is available on the Live View page by clicking the Ctrl panel button. See PTZ (Pan Tilt Zoom), on page 23 for information on the PT driver.

The CTRL panel also provides standard buttons, autofocus, backlight compensation, IR cut filter and brightness. The list of shortcut command buttons displays the available information for each configured command button.

•The Label is the text on the button itself

•Information is the text displayed for the button when the cursor is held over the button

•URL shows the path to the command

Enable - Shows whether the selected command is enabled or not. This is controlled by the

Enable/Disable button below the list.

To work with shortcut command buttons, click Add to create a new button, or select an existing button from the list and click Modify or Remove.

Enable/Disable controls

Enable or disable the PTZ by checking/unchecking these boxes. When disabled, the Pan, Tilt, Zoom and Focus sliders will not be available on the Live View page or any other page with the video stream included.

Note:

Pan/Tilt are available only if there is a PT device connected to the AXIS Q1755/-E.

Control Queue

The PTZ Control Queue is a system for placing PTZ control requests in a queue. The control queue fields on the Live View page show the user's current status and position in the queue and the amount of time remaining until PTZ control is given, or if the user already has control - the amount of control time remaining.

Control Queue Settings

Enable PTZ Control Queue - This enables the queuing function and displays the user's status and position in the queue on the Live View page.

Limit number of users in queue to - This can be specified up to 100. The default value is 20.

Control queue poll time - To keep the control queue up-to-date, the waiting clients must regularly poll the AXIS Q1755/-E to keep their place in the queue. If the client does not send a new poll query within the time set here (in seconds), the client will be dropped from the queue.

Setting a higher value can lead to greater numbers of 'dead' requests in the queue, i.e. when clients leave the queue. Setting too low a value, so that clients are required to send frequent poll queries, may result in the AXIS Q1755/-E becoming overloaded.

Click Save to save the settings.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents USER’S Manual Axis Q1755/-E User’s Manual Axis Q1755/-E Table of contents Contents Key features Product DescriptionAxis Q1755/-E Product Description Overview Rear view Bottom viewAlarm output connected at delivery Axis Q1755-EAccessing the Camera Access from a browserAxis Q1755/-E Accessing the Camera Setting the root password Access from the internetClick the Create self-signed certificate button Setup Events Gatekeeper Live ViewGeneral controls Axis Media Control toolbarHalf-duplex mode AMC Audio controlsHow to stream H.264 Video StreamsAxis Q1755/-E Video Streams Alternative methods of accessing the video stream Motion JpegAxis Q1755/-E Video Streams Axis Media Control AMC Unicast via Rtsp axrtsp//ip/axis-media/media.ampBasic Setup Axis Q1755/-E Basic SetupVideo & Audio Video StreamAxis Q1755/-E Video & Audio Text Overlay Settings 264 GOV SettingsAudio Bit Rate ControlCamera Settings Exposure SettingsStream Profiles White balanceFocus and zoom Overlay ImagePrivacy mask Audio Settings Audio mode The available audio modes areAudio Channels Audio InputAxis Q1755/-E Video & Audio Audio Output Live View Config Axis Q1755/-E Live View ConfigDefault Viewer Layout Viewer Settings Action Buttons User Defined Links Other browsersAxis Q1755/-E Live View Config Output Buttons Preset Positions PTZ Pan Tilt ZoomAdvanced Pan/Tilt DeviceControl Queue Settings Panel Shortcut Command ButtonsEnable/Disable controls ControlsEvents Event ServersEvent Types Axis Q1755/-E EventsHow to set up a triggered event Following example describes how to set up a triggered eventAxis Q1755/-E Events Triggered Event Save streamHow to set up a scheduled event SettingsGatekeeper Camera tamperingSet up a motion detection include window After you define these settings, click SaveMotion Detection Go to Events Motion DetectionPort Status ExamplesRecording List Axis Q1755/-E Recording ListRemove button is used to delete unlocked recordings System Options SecurityAxis Q1755/-E System Options UsersAudio Support Axis Q1755/-E System Options IeeeCertificates Basic TCP/IP Settings Network SettingsIPv4 Address Configuration Date & TimeAdvanced TCP/IP Settings IPv6 Address ConfigurationServices DNS ConfigurationLAN intranet Link-Local IPv4 AddressHttp and Https NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailSnmp v1/v2 As the Internet. See the online help for more informationStorage Ports & DevicesLED Settings MaintenanceSupport Plain Config ConfigurationAdvanced File UploadResetting to the Factory Default Settings Using the Control ButtonAbout Axis Q1755/-E AboutUnit connectors Axis Q1755/-E Unit connectorsLED indicators Troubleshooting Axis Q1755/-E TroubleshootingEmergency Recovery Procedure Checking the FirmwareAxis Q1755/-E Troubleshooting Axis Support Installation Guide Guide or the ARP/Ping commandsRouter to allow access to the camera Check the Internet firewall with your system administratorSet to Decode only I frames Volume settings are correct Server. This is enabled under System Options Date & TimeExisting files to free up space NanceTechnical Specifications Axis Q1755/-E Technical SpecificationsAlarm triggers Alarm eventsSystem Application Integration ProgrammingPower ConnectorsDimensions WeightGeneral performance considerations Glossary of Terms Axis Q1755/-E Glossary of TermsEtrax Ethernet Token Ring Axis Axis own microprocessor Half-duplex See Full-duplexMAC address Media Access Control address a MAC VOP See VOPAxis Q1755/-E Glossary of Terms URL Uniform Resource Locator An address on the network More secure the encryption Active/Inactive 22 Alarm 28, 41 AMC 7 ARP/Ping 34 Audio Backup Bit Rate Bonjour Buffer SizeAxis Q1755/-E Index Video Stream
Top Page Image Contents