Axis Communications AXIS Q1755 Advanced TCP/IP Settings, IPv6 Address Configuration, Services

Page 34

AXIS Q1755/-E - System Options

Use the following IP address - To use a static IP address for the network camera, check the radio button and then make the following settings:

•IP address - Specify a unique IP address for your AXIS Q1755/-E. (To check if the IP address you intend to use is avail- able or not, click the Test button)

•Subnet mask - Specify the mask for the subnet the AXIS Q1755/-E is located on

•Default router - Specify the IP address of the default router (gateway) used for connecting devices attached to differ- ent networks and network segments.

IPv6 Address Configuration

Check the Enable IPv6 box to enable IPv6. Other settings for IPv6 are configured in the network router.

Services

Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional resetting of the IP address.

Notes:

•The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set. In order to reset the IP address, the camera must be restarted to activate ARP/Ping for an additional two minutes.

•Pinging the unit is still possible when this service is disabled.

AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to assign a host name for easy access to your network camera (requires Internet access).

Click Settings... to register the camera with the Axis Internet Dynamic DNS service, or to modify the existing settings (requires access to the Internet). The domain name currently registered at the Axis Internet Dynamic DNS service for your product can at any time be removed.

For more information, please refer to the online help.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.

Obtain DNS server address via DHCP - Automatically use the DNS server settings provided by the DHCP server. Click the View button to see the current settings.

Use the following DNS server address - Enter the desired DNS server by specifying the following:

•Domain name - enter the domain(s) to search for the host name used by the network cameras. Multiple domains can be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, for example, myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is the Domain name.

•DNS servers - enter the IP addresses of the primary, and secondary DNS servers.

Note:This is not mandatory with regard to secondary DNS servers.

NTP Configuration

Obtain NTP server address via DHCP - Check this radio button to automatically look up and use the NTP server settings as provided by DHCP. Click the View button to see the current settings.

Use the following NTP server address - to create manual settings, check this radio button and enter the host name or IP address of the NTP server.

Host Name Configuration - The network cameras can be accessed using a host name, instead of an IP address. The host name is usually the same as the assigned DNS Name.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents USER’S Manual Axis Q1755/-E User’s Manual Axis Q1755/-E Table of contents Contents Product Description Key featuresAxis Q1755/-E Product Description Overview Rear view Bottom viewAlarm output connected at delivery Axis Q1755-EAccess from a browser Accessing the CameraAxis Q1755/-E Accessing the Camera Access from the internet Setting the root passwordClick the Create self-signed certificate button General controls Setup Events GatekeeperLive View Axis Media Control toolbarHalf-duplex mode AMC Audio controlsVideo Streams How to stream H.264Axis Q1755/-E Video Streams Axis Q1755/-E Video Streams Axis Media Control AMC Alternative methods of accessing the video streamMotion Jpeg Unicast via Rtsp axrtsp//ip/axis-media/media.ampBasic Setup Axis Q1755/-E Basic SetupVideo & Audio Video StreamAudio Axis Q1755/-E Video & Audio Text Overlay Settings264 GOV Settings Bit Rate ControlStream Profiles Camera SettingsExposure Settings White balanceOverlay Image Focus and zoomPrivacy mask Audio Channels Audio SettingsAudio mode The available audio modes are Audio InputAxis Q1755/-E Video & Audio Audio Output Default Viewer Live View ConfigAxis Q1755/-E Live View Config LayoutUser Defined Links Viewer SettingsAction Buttons Other browsersAxis Q1755/-E Live View Config Output Buttons Advanced Pan/Tilt Preset PositionsPTZ Pan Tilt Zoom DeviceEnable/Disable controls Control Queue SettingsPanel Shortcut Command Buttons ControlsEvent Types EventsEvent Servers Axis Q1755/-E EventsAxis Q1755/-E Events Triggered Event How to set up a triggered eventFollowing example describes how to set up a triggered event Save streamGatekeeper How to set up a scheduled eventSettings Camera tamperingMotion Detection Set up a motion detection include windowAfter you define these settings, click Save Go to Events Motion DetectionPort Status ExamplesAxis Q1755/-E Recording List Recording ListRemove button is used to delete unlocked recordings Axis Q1755/-E System Options System OptionsSecurity UsersAxis Q1755/-E System Options Ieee Audio SupportCertificates IPv4 Address Configuration Basic TCP/IP SettingsNetwork Settings Date & TimeServices Advanced TCP/IP SettingsIPv6 Address Configuration DNS ConfigurationHttp and Https LAN intranetLink-Local IPv4 Address NAT traversal port mapping for IPv4Snmp v1/v2 QoS Quality of ServiceSmtp email As the Internet. See the online help for more informationStorage Ports & DevicesMaintenance LED SettingsSupport Advanced Plain ConfigConfiguration File UploadAbout Resetting to the Factory Default SettingsUsing the Control Button Axis Q1755/-E AboutUnit connectors Axis Q1755/-E Unit connectorsLED indicators Emergency Recovery Procedure TroubleshootingAxis Q1755/-E Troubleshooting Checking the FirmwareAxis Q1755/-E Troubleshooting Axis Support Router to allow access to the camera Installation GuideGuide or the ARP/Ping commands Check the Internet firewall with your system administratorSet to Decode only I frames Existing files to free up space Volume settings are correctServer. This is enabled under System Options Date & Time NanceTechnical Specifications Axis Q1755/-E Technical SpecificationsSystem Application Alarm triggersAlarm events Integration ProgrammingDimensions PowerConnectors WeightGeneral performance considerations Glossary of Terms Axis Q1755/-E Glossary of TermsEtrax Ethernet Token Ring Axis Axis own microprocessor Half-duplex See Full-duplexMAC address Media Access Control address a MAC VOP See VOPAxis Q1755/-E Glossary of Terms URL Uniform Resource Locator An address on the network More secure the encryption Backup Bit Rate Bonjour Buffer Size Active/Inactive 22 Alarm 28, 41 AMC 7 ARP/Ping 34 AudioAxis Q1755/-E Index Video Stream
Top Page Image Contents