Axis Communications AXIS Q1755-E user manual Storage, Ports & Devices

Page 37

AXIS Q1755/-E - System Options

Traps for SNMP v1/v2

Traps are used by the camera to send messages to a management system for important events or status changes.

If Enable traps is selected, enter the email address where the trap message is to be sent as well as the Trap community that should receive the message.

There are four types of traps available for AXIS Q1755/-E.

•Cold start

•Warm start

•Link up

•Authentication failed

SNMP v3

SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled. To use traps with SNMP v3 an SNMP v3 management application is required.

If the Enable SNMP v3 option is enabled, provide the Initial user password. Note that the initial password is activated only when HTTPS is enabled and can only be set once.

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

When SNMP configuration is ready, click Save to use the new settings or Reset to return to the default values.

UPnP™

The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automatically detected by operating systems and clients that support this protocol.

RTP/H.264

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For

more information, please see the online help .

Bonjour

The network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systems and clients that support this.

Storage

SD Card

The Disk Management window is used to set up and manage local storage. It is used to connect memory cards for recording video, monitoring a disk's status, enabling automatic cleanup, and preventing a memory card's memory from being overwritten.

Storage Device - is used to identify and monitor the status of the SD card. It shows the size of the SD card and how much free space is available for storage. It is also used to mount and format SD cards for local storage.

Device Settings - is used to configure removal of recorded video. Automatic disk cleanup can be enabled and set up according to a schedule, and an SD card can be locked to prevent storage removal.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described in Unit connectors, on page 41.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents USER’S Manual Axis Q1755/-E User’s Manual Axis Q1755/-E Table of contents Contents Product Description Key featuresAxis Q1755/-E Product Description Rear view Bottom view OverviewAxis Q1755-E Alarm output connected at deliveryAccess from a browser Accessing the CameraAxis Q1755/-E Accessing the Camera Access from the internet Setting the root passwordClick the Create self-signed certificate button Live View Setup Events GatekeeperGeneral controls Axis Media Control toolbarAMC Audio controls Half-duplex modeVideo Streams How to stream H.264Axis Q1755/-E Video Streams Motion Jpeg Alternative methods of accessing the video streamAxis Q1755/-E Video Streams Axis Media Control AMC Unicast via Rtsp axrtsp//ip/axis-media/media.ampAxis Q1755/-E Basic Setup Basic SetupVideo Stream Video & Audio264 GOV Settings Axis Q1755/-E Video & Audio Text Overlay SettingsAudio Bit Rate ControlExposure Settings Camera SettingsStream Profiles White balanceOverlay Image Focus and zoomPrivacy mask Audio mode The available audio modes are Audio SettingsAudio Channels Audio InputAxis Q1755/-E Video & Audio Audio Output Axis Q1755/-E Live View Config Live View ConfigDefault Viewer LayoutAction Buttons Viewer SettingsUser Defined Links Other browsersAxis Q1755/-E Live View Config Output Buttons PTZ Pan Tilt Zoom Preset PositionsAdvanced Pan/Tilt DevicePanel Shortcut Command Buttons Control Queue SettingsEnable/Disable controls ControlsEvent Servers EventsEvent Types Axis Q1755/-E EventsFollowing example describes how to set up a triggered event How to set up a triggered eventAxis Q1755/-E Events Triggered Event Save streamSettings How to set up a scheduled eventGatekeeper Camera tamperingAfter you define these settings, click Save Set up a motion detection include windowMotion Detection Go to Events Motion DetectionExamples Port StatusAxis Q1755/-E Recording List Recording ListRemove button is used to delete unlocked recordings Security System OptionsAxis Q1755/-E System Options UsersAxis Q1755/-E System Options Ieee Audio SupportCertificates Network Settings Basic TCP/IP SettingsIPv4 Address Configuration Date & Time IPv6 Address Configuration Advanced TCP/IP Settings Services DNS ConfigurationLink-Local IPv4 Address LAN intranetHttp and Https NAT traversal port mapping for IPv4Smtp email QoS Quality of ServiceSnmp v1/v2 As the Internet. See the online help for more informationPorts & Devices StorageMaintenance LED SettingsSupport Configuration Plain ConfigAdvanced File UploadUsing the Control Button Resetting to the Factory Default SettingsAbout Axis Q1755/-E AboutAxis Q1755/-E Unit connectors Unit connectorsLED indicators Axis Q1755/-E Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareAxis Q1755/-E Troubleshooting Axis Support Guide or the ARP/Ping commands Installation GuideRouter to allow access to the camera Check the Internet firewall with your system administratorSet to Decode only I frames Server. This is enabled under System Options Date & Time Volume settings are correctExisting files to free up space NanceAxis Q1755/-E Technical Specifications Technical SpecificationsAlarm events Alarm triggersSystem Application Integration ProgrammingConnectors PowerDimensions WeightGeneral performance considerations Axis Q1755/-E Glossary of Terms Glossary of TermsHalf-duplex See Full-duplex Etrax Ethernet Token Ring Axis Axis own microprocessorVOP See VOP MAC address Media Access Control address a MACAxis Q1755/-E Glossary of Terms URL Uniform Resource Locator An address on the network More secure the encryption Backup Bit Rate Bonjour Buffer Size Active/Inactive 22 Alarm 28, 41 AMC 7 ARP/Ping 34 AudioAxis Q1755/-E Index Video Stream
Top Page Image Contents