Axis Communications AXIS Q1755-E Date & Time, Basic TCP/IP Settings, Network Settings

Page 33

AXIS Q1755/-E - System Options

Date & Time

Current Server Time - Displays the current date and time (24h clock). The time can be displayed in 12h clock format in the overlay (see below).

New Server Time - Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select the Automatically adjust for daylight saving time changes.

Note:

The time zone setting only applies when the device’s time is synchronized with an NTP server.

From the Time Mode section, select the preferred method to use for setting the time:

•Synchronize with computer time - sets the time from the clock on your computer.

•Synchronize with NTP Server - the camera will obtain the time from an NTP server.

•Set manually - this option allows you to manually set the time and date.

Note:

If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. See Basic TCP/IP Settings, below.

Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the video streams. Use the predefined formats or use your own custom date and time formats. See File Naming & Date/Time Formats in the

online help for information on how to create your own date and time formats.

Network

Basic TCP/IP Settings

AXIS Q1755/-E support both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static IP address can be set manually. If IPv6 is enabled, the network cameras receive an IP address according to the configuration in the network router. There are also options for setting up notification of changes in the IP address, and for using the AXIS Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help.

Network Settings

Click the View button for an overview of the IP configuration of the network camera.

IPv4 Address Configuration

Check the Enable IPv4 box to enable IPv4.

Obtain IP address via DHCP - Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a particular MAC address.

Note:

DHCP should only be enabled if your DHCP server can update a DNS server, which then allows you to access the net- work camera by name (host name). If DHCP is enabled and you cannot access the unit, run AXIS IP Utility to search the network for connected Axis products or reset the network camera to factory default settings and then perform the installation again.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents USER’S Manual Axis Q1755/-E User’s Manual Axis Q1755/-E Table of contents Contents Key features Product DescriptionAxis Q1755/-E Product Description Rear view Bottom view OverviewAxis Q1755-E Alarm output connected at deliveryAccessing the Camera Access from a browserAxis Q1755/-E Accessing the Camera Setting the root password Access from the internetClick the Create self-signed certificate button Live View Setup Events GatekeeperGeneral controls Axis Media Control toolbarAMC Audio controls Half-duplex modeHow to stream H.264 Video StreamsAxis Q1755/-E Video Streams Motion Jpeg Alternative methods of accessing the video streamAxis Q1755/-E Video Streams Axis Media Control AMC Unicast via Rtsp axrtsp//ip/axis-media/media.ampAxis Q1755/-E Basic Setup Basic SetupVideo Stream Video & Audio264 GOV Settings Axis Q1755/-E Video & Audio Text Overlay SettingsAudio Bit Rate ControlExposure Settings Camera SettingsStream Profiles White balanceFocus and zoom Overlay ImagePrivacy mask Audio mode The available audio modes are Audio SettingsAudio Channels Audio InputAxis Q1755/-E Video & Audio Audio Output Axis Q1755/-E Live View Config Live View ConfigDefault Viewer LayoutAction Buttons Viewer SettingsUser Defined Links Other browsersAxis Q1755/-E Live View Config Output Buttons PTZ Pan Tilt Zoom Preset PositionsAdvanced Pan/Tilt DevicePanel Shortcut Command Buttons Control Queue SettingsEnable/Disable controls ControlsEvent Servers EventsEvent Types Axis Q1755/-E EventsFollowing example describes how to set up a triggered event How to set up a triggered eventAxis Q1755/-E Events Triggered Event Save streamSettings How to set up a scheduled eventGatekeeper Camera tamperingAfter you define these settings, click Save Set up a motion detection include windowMotion Detection Go to Events Motion DetectionExamples Port StatusRecording List Axis Q1755/-E Recording ListRemove button is used to delete unlocked recordings Security System OptionsAxis Q1755/-E System Options UsersAudio Support Axis Q1755/-E System Options IeeeCertificates Network Settings Basic TCP/IP SettingsIPv4 Address Configuration Date & TimeIPv6 Address Configuration Advanced TCP/IP SettingsServices DNS ConfigurationLink-Local IPv4 Address LAN intranetHttp and Https NAT traversal port mapping for IPv4Smtp email QoS Quality of ServiceSnmp v1/v2 As the Internet. See the online help for more informationPorts & Devices StorageLED Settings MaintenanceSupport Configuration Plain ConfigAdvanced File UploadUsing the Control Button Resetting to the Factory Default SettingsAbout Axis Q1755/-E AboutAxis Q1755/-E Unit connectors Unit connectorsLED indicators Axis Q1755/-E Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareAxis Q1755/-E Troubleshooting Axis Support Guide or the ARP/Ping commands Installation GuideRouter to allow access to the camera Check the Internet firewall with your system administratorSet to Decode only I frames Server. This is enabled under System Options Date & Time Volume settings are correctExisting files to free up space NanceAxis Q1755/-E Technical Specifications Technical SpecificationsAlarm events Alarm triggersSystem Application Integration ProgrammingConnectors PowerDimensions WeightGeneral performance considerations Axis Q1755/-E Glossary of Terms Glossary of TermsHalf-duplex See Full-duplex Etrax Ethernet Token Ring Axis Axis own microprocessorVOP See VOP MAC address Media Access Control address a MACAxis Q1755/-E Glossary of Terms URL Uniform Resource Locator An address on the network More secure the encryption Active/Inactive 22 Alarm 28, 41 AMC 7 ARP/Ping 34 Audio Backup Bit Rate Bonjour Buffer SizeAxis Q1755/-E Index Video Stream
Top Page Image Contents