Axis Communications axis q6042s ptz dome network camera Media Converter Switch LED Indicators

Page 10

AXIS Q6042–S PTZ Dome Network Camera

Hardware Overview

Dip switch position

 

Description

 

 

 

Default (middle)

B

Remove VLAN tags from forwarded multicast packages. Use this setting when connecting to the

 

 

network, directly or through a router or network switch.

 

 

 

Left

A

Block multicast packages that have a VLAN tag. Use this setting when connecting to a device that is

 

 

not intended for multicast viewing.

 

 

 

Right

C

Forward multicast packages with a VLAN tag. Use this setting when connecting to another media

 

 

converter switch.

 

 

 

VLAN tags are used to create independent logical networks, virtual local area networks (VLANs), within a physical network. Multiple media converter switches that are connected to each other in a daisy chain are members of the same VLAN. The media converter switches tag the multicast packages moving between them so that the next media converter switch in line knows the destination of the packages. In other words, the VLAN tag serves as a VLAN identifier. VLAN tagging should only be used when using multiple cameras and media converter switches because forwarding multicast packages with a VLAN tag only serves a purpose when the port is connected to another media converter switch, which might be connected to potential viewers.

Note

When connecting an outgoing media converter switch network connector to another type of network device, set the dip switch to position A to protect the device from multicast traffic.

Media Converter Switch LED Indicators

LED

Color

Indication

 

 

 

Power

Unlit

DC power unconnected or current protection engaged (power overload)

 

 

 

 

Green

DC power connected.

 

 

 

Network (4x)

Amber

10 Mbit connection. Flashes during activity.

 

 

 

 

Green

100/1000 Mbit connection. Flashes during activity.

 

 

 

Camera

Green

100 Mbit connection. Flashes during activity.

 

 

 

10

Image 10
Contents Axis Q6042-S PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6042-S PTZ Dome Network CameraTechnical Specifications Hardware Overview Hardware OverviewPressurize the Camera Recommended Multi-connector Connectors and ButtonsLED Indicators SD Card SlotHardware Overview Media Converter Switch Media Converter Switch ConnectorsDip switch position Network Connector Dip SwitchesConnector internal 2-pin I/O terminal block Media Converter Switch LED Indicators DescriptionAccess from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetClick Use Https Controls on the Live View Accessing the Product Live ViewGo to Setup Events Manual TriggerAxis Media Control viewer toolbar PTZ ControlsAxis Q6042-S PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis Q6042-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video Stream VideoVideo Pixel CounterImage Click Save to apply the new settingsStream Profiles 264Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Image SettingsOverlay Go to Video Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6042-S PTZ Dome Network Camera Live View Config Live View ConfigUser Defined Links Default Viewer for BrowsersViewer Settings Output ButtonsGo to Setup Live View Config PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAutotracking ConfigurationPTZ Pan Tilt Zoom Gatekeeper Exclude AreasTo add a guard tour Guard TourTour Recording To add a recorded tourAdvanced Osdi ZonesLimits Control Queue Operator Same as administrator but with lower priorityControls Detectors Set Up Motion Detection WindowsDetectors Shock DetectionMotion Detection Parameters Applications Install ApplicationApplications Application LicensesAxis Q6042-S PTZ Dome Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlFallback Action RecipientsRecipient Use with action Go to Events Recipients and click Add Setting Up an Email RecipientSchedules Go to Events Schedules and click AddEvents Recurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 StorageUPnPTM BonjourTo add a network share Network ShareGo to System Options Storage and click SD Card Go to System Options Storage Click Network ShareSystem Options Ports & Devices MaintenanceSupport Scripting Plain ConfigLogs & Reports File UploadSystem Options Reset to Factory Default Settings Function Pin wire Specifications Multi-Connector CableMulti-Connector Cable Activated, floating unconnected when Drain, 100 mAEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareWhen using ARP/Ping Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Storage and disk management problems Video and image problems, generalVideo Camera Settings Media converter switchTechnical Specifications Technical SpecificationsMaintenance Function/group Specifications System ApplicationInstallation aid Integration Programming InterfaceConnectors Function/group Specifications General CasingPower WeightCamera Connectors Technical Specifications Media Converter Switch ConnectorsExternal Connectors Performance Considerations Collector 100 mAM1.8

axis q6042s ptz dome network camera specifications

The Axis Q6042-S PTZ Dome Network Camera is a sophisticated device designed for high-performance surveillance in diverse environments. With its robust construction and advanced features, this camera is ideal for use in critical areas such as airports, train stations, and city surveillance, ensuring reliable monitoring and security.

One of the standout features of the Axis Q6042-S is its high-definition image quality. The camera offers a resolution of up to 720p, allowing for clear and detailed video capture. This is further enhanced by its powerful zoom capabilities, featuring a 36x optical zoom lens. This enables users to focus on distant objects without sacrificing image quality, making it easy to identify individuals or objects of interest.

The pan-tilt-zoom (PTZ) functionality of the Axis Q6042-S is another significant characteristic. The camera can pan 360 degrees continuously and tilt from -20 to 90 degrees. This extensive range of motion provides complete coverage of the surveillance area, allowing operators to track fast-moving objects efficiently. Additionally, with preset positions, users can quickly move to key areas of interest, streamlining the monitoring process.

For versatility in different lighting conditions, the camera includes features such as day/night functionality and Axis' Lightfinder technology, which enhances its ability to capture color images in low-light environments. The advanced image processing capabilities ensure that the video remains clear and detailed, regardless of the lighting conditions.

Another technological advantage of the Axis Q6042-S is its advanced compression technologies, including H.264 and Motion JPEG. These technologies allow for efficient video streaming, reducing bandwidth and storage requirements without compromising video quality. The camera also supports Power over Ethernet (PoE), simplifying installation by allowing both power and data to be delivered over a single cable.

Moreover, the Axis Q6042-S is equipped with built-in analytics capabilities, enabling it to detect motion and trigger alerts based on predefined parameters. This intelligent functionality not only enhances security but also reduces the need for constant monitoring, allowing operators to focus on critical events.

In summary, the Axis Q6042-S PTZ Dome Network Camera stands out with its high-definition imaging, extensive PTZ capabilities, low-light performance, advanced compression technologies, and built-in analytics. Its robust design and versatile features make it an excellent choice for any surveillance application requiring precision, reliability, and ease of use.