Axis Communications axis q6042s ptz dome network camera Accessing the Product Live View

Page 13

AXIS Q6042–S PTZ Dome Network Camera

Accessing the Product

The Live View Page

The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View page. The following provides an overview of each available control.

Controls on the Live View Page

Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream profiles, see page 21.

Click Pulse to activate the product’s output port for a defined period of time. For information about how to enable and configure output buttons, see page 27.

Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information about how to enable and configure output buttons, see page 27.

The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger, on page 13.

Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

Enable or disable the Gatekeeper by selecting On or Off from the drop-down list. Read more about the Gatekeeper on page 30.

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration.

To configure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and configure the other settings as required. For more information about action rules, see Events, on page 38.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Layout.

2.Under Action Buttons, select Show manual trigger button.

13

Image 13
Contents Axis Q6042-S PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q6042-S PTZ Dome Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewPressurize the Camera Recommended LED Indicators Connectors and ButtonsMulti-connector SD Card SlotMedia Converter Switch Connectors Hardware Overview Media Converter SwitchDip switch position Network Connector Dip SwitchesConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetClick Use Https Go to Setup Events Accessing the Product Live ViewControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarAxis Q6042-S PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6042-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Click Save to apply the new settingsImage 264Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6042-S PTZ Dome Network Camera Live View Config Live View ConfigViewer Settings Default Viewer for BrowsersUser Defined Links Output ButtonsGo to Setup Live View Config Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Gatekeeper ConfigurationAutotracking Exclude AreasTour Recording Guard TourTo add a guard tour To add a recorded tourAdvanced Osdi ZonesLimits Control Queue Operator Same as administrator but with lower priorityControls Detectors Set Up Motion Detection WindowsDetectors Shock DetectionMotion Detection Parameters Applications Install ApplicationApplications Application LicensesAxis Q6042-S PTZ Dome Network Camera Events EventsSystem Setting Up an Action RuleTime PTZ ControlFallback Action RecipientsRecipient Use with action Schedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add Events RecurrencesRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourGo to System Options Storage and click SD Card Network ShareTo add a network share Go to System Options Storage Click Network ShareSystem Options Ports & Devices MaintenanceSupport Logs & Reports Plain ConfigScripting File UploadSystem Options Reset to Factory Default Settings Multi-Connector Cable Multi-Connector CableFunction Pin wire Specifications Activated, floating unconnected when Drain, 100 mATroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsWhen using ARP/Ping Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Video Camera Settings Video and image problems, generalStorage and disk management problems Media converter switchTechnical Specifications Technical SpecificationsInstallation aid Function/group Specifications System ApplicationMaintenance Integration Programming InterfacePower Function/group Specifications General CasingConnectors WeightCamera Connectors Technical Specifications Media Converter Switch ConnectorsExternal Connectors Collector 100 mA Performance ConsiderationsM1.8

axis q6042s ptz dome network camera specifications

The Axis Q6042-S PTZ Dome Network Camera is a sophisticated device designed for high-performance surveillance in diverse environments. With its robust construction and advanced features, this camera is ideal for use in critical areas such as airports, train stations, and city surveillance, ensuring reliable monitoring and security.

One of the standout features of the Axis Q6042-S is its high-definition image quality. The camera offers a resolution of up to 720p, allowing for clear and detailed video capture. This is further enhanced by its powerful zoom capabilities, featuring a 36x optical zoom lens. This enables users to focus on distant objects without sacrificing image quality, making it easy to identify individuals or objects of interest.

The pan-tilt-zoom (PTZ) functionality of the Axis Q6042-S is another significant characteristic. The camera can pan 360 degrees continuously and tilt from -20 to 90 degrees. This extensive range of motion provides complete coverage of the surveillance area, allowing operators to track fast-moving objects efficiently. Additionally, with preset positions, users can quickly move to key areas of interest, streamlining the monitoring process.

For versatility in different lighting conditions, the camera includes features such as day/night functionality and Axis' Lightfinder technology, which enhances its ability to capture color images in low-light environments. The advanced image processing capabilities ensure that the video remains clear and detailed, regardless of the lighting conditions.

Another technological advantage of the Axis Q6042-S is its advanced compression technologies, including H.264 and Motion JPEG. These technologies allow for efficient video streaming, reducing bandwidth and storage requirements without compromising video quality. The camera also supports Power over Ethernet (PoE), simplifying installation by allowing both power and data to be delivered over a single cable.

Moreover, the Axis Q6042-S is equipped with built-in analytics capabilities, enabling it to detect motion and trigger alerts based on predefined parameters. This intelligent functionality not only enhances security but also reduces the need for constant monitoring, allowing operators to focus on critical events.

In summary, the Axis Q6042-S PTZ Dome Network Camera stands out with its high-definition imaging, extensive PTZ capabilities, low-light performance, advanced compression technologies, and built-in analytics. Its robust design and versatile features make it an excellent choice for any surveillance application requiring precision, reliability, and ease of use.