Axis Communications axis q6042s ptz dome network camera user manual Detectors, Shock Detection

Page 34

AXIS Q6042–S PTZ Dome Network Camera

Detectors

Detectors

Shock Detection

Enable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hit by an object.

Use the Shock sensitivity slider to adjust the sensitivity level at which the product should send an alarm upon being hit. Low sensitivity value implies that the product will generate an alarm only if the hit is powerful.

Motion Detection

Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.

Motion detection is configured by defining up to 10 Include and Exclude windows:

•Include windows — define areas where motion should be detected

•Exclude windows — define areas within an Include window that should be ignored (areas outside Include windows are automatically ignored).

For instructions, see Set Up Motion Detection Windows, on page 34.

To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See Motion Detection Parameters, on page 35.

Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected. Possible actions include uploading images and start recording. For more information, see Setting Up an Action Rule, on page 39.

Note

•Using the motion detection feature may decrease the product’s overall performance.

•The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window.

Set Up Motion Detection Windows

To set up a motion detection Include Window, follow these instructions:

1.Go to Detectors > Motion Detection.

2.Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name.

3.Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired position) of the window.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Axis Q6042-S PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6042-S PTZ Dome Network CameraTechnical Specifications Hardware Overview Hardware OverviewPressurize the Camera Recommended Multi-connector Connectors and ButtonsLED Indicators SD Card SlotHardware Overview Media Converter Switch Media Converter Switch ConnectorsDip switch position Network Connector Dip SwitchesConnector internal 2-pin I/O terminal block Media Converter Switch LED Indicators DescriptionAccess from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetClick Use Https Controls on the Live View Accessing the Product Live ViewGo to Setup Events Manual TriggerAxis Media Control viewer toolbar PTZ ControlsAxis Q6042-S PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis Q6042-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video Stream VideoVideo Pixel CounterImage Click Save to apply the new settingsStream Profiles 264Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Image SettingsOverlay Go to Video Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6042-S PTZ Dome Network Camera Live View Config Live View ConfigUser Defined Links Default Viewer for BrowsersViewer Settings Output ButtonsGo to Setup Live View Config PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAutotracking ConfigurationPTZ Pan Tilt Zoom Gatekeeper Exclude AreasTo add a guard tour Guard TourTour Recording To add a recorded tourAdvanced Osdi ZonesLimits Control Queue Operator Same as administrator but with lower priorityControls Detectors Set Up Motion Detection WindowsDetectors Shock DetectionMotion Detection Parameters Applications Install ApplicationApplications Application LicensesAxis Q6042-S PTZ Dome Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlFallback Action RecipientsRecipient Use with action Go to Events Recipients and click Add Setting Up an Email RecipientSchedules Go to Events Schedules and click AddEvents Recurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 StorageUPnPTM BonjourTo add a network share Network ShareGo to System Options Storage and click SD Card Go to System Options Storage Click Network ShareSystem Options Ports & Devices MaintenanceSupport Scripting Plain ConfigLogs & Reports File UploadSystem Options Reset to Factory Default Settings Function Pin wire Specifications Multi-Connector CableMulti-Connector Cable Activated, floating unconnected when Drain, 100 mAEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareWhen using ARP/Ping Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Storage and disk management problems Video and image problems, generalVideo Camera Settings Media converter switchTechnical Specifications Technical SpecificationsMaintenance Function/group Specifications System ApplicationInstallation aid Integration Programming InterfaceConnectors Function/group Specifications General CasingPower WeightCamera Connectors Technical Specifications Media Converter Switch ConnectorsExternal Connectors Performance Considerations Collector 100 mAM1.8

axis q6042s ptz dome network camera specifications

The Axis Q6042-S PTZ Dome Network Camera is a sophisticated device designed for high-performance surveillance in diverse environments. With its robust construction and advanced features, this camera is ideal for use in critical areas such as airports, train stations, and city surveillance, ensuring reliable monitoring and security.

One of the standout features of the Axis Q6042-S is its high-definition image quality. The camera offers a resolution of up to 720p, allowing for clear and detailed video capture. This is further enhanced by its powerful zoom capabilities, featuring a 36x optical zoom lens. This enables users to focus on distant objects without sacrificing image quality, making it easy to identify individuals or objects of interest.

The pan-tilt-zoom (PTZ) functionality of the Axis Q6042-S is another significant characteristic. The camera can pan 360 degrees continuously and tilt from -20 to 90 degrees. This extensive range of motion provides complete coverage of the surveillance area, allowing operators to track fast-moving objects efficiently. Additionally, with preset positions, users can quickly move to key areas of interest, streamlining the monitoring process.

For versatility in different lighting conditions, the camera includes features such as day/night functionality and Axis' Lightfinder technology, which enhances its ability to capture color images in low-light environments. The advanced image processing capabilities ensure that the video remains clear and detailed, regardless of the lighting conditions.

Another technological advantage of the Axis Q6042-S is its advanced compression technologies, including H.264 and Motion JPEG. These technologies allow for efficient video streaming, reducing bandwidth and storage requirements without compromising video quality. The camera also supports Power over Ethernet (PoE), simplifying installation by allowing both power and data to be delivered over a single cable.

Moreover, the Axis Q6042-S is equipped with built-in analytics capabilities, enabling it to detect motion and trigger alerts based on predefined parameters. This intelligent functionality not only enhances security but also reduces the need for constant monitoring, allowing operators to focus on critical events.

In summary, the Axis Q6042-S PTZ Dome Network Camera stands out with its high-definition imaging, extensive PTZ capabilities, low-light performance, advanced compression technologies, and built-in analytics. Its robust design and versatile features make it an excellent choice for any surveillance application requiring precision, reliability, and ease of use.
Top Page Image Contents