Axis Communications axis q6042s ptz dome network camera user manual Network Connector Dip Switches

Page 9

AXIS Q6042–S PTZ Dome Network Camera

Hardware Overview

Network slot SFP (external) - Two SFP slots (100Base-FX/1000Base-X) for network connectivity.

Each RJ45 and SFP port has its own dip switch. The dip switches control how the port forwards data. See Network Connector Dip Switches.

Dip switch position

 

Description of use

 

 

 

Default (middle)

B

When connecting to the network, directly or through a router or network

 

 

switch.

 

 

 

Left

A

When connecting to a camera or a device that is not intended for viewing

 

 

data.

 

 

 

Right

C

When connecting to another media converter switch.

 

 

 

Network connector (internal) - Two 2-pin Ethernet terminal blocks.

I/O connector (external) - 6-pin configurable I/O terminal block, which is connected to the camera through the multi-connector cable. Use with external devices in combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:

•Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > Port & Devices > Port Status) if the alarm device is activated.

•Digital input – An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under System Options > Port & Devices > Port Status).

I/O connector (internal) - 2–pin I/O terminal block.

Network Connector Dip Switches

Important

Always use the default dip switch setting (position B) if the relationship between devices in the system is not defined.

The camera attaches a particular VLAN tag to all its forwarded multicast packages. The media converter switch manages how these multicast packages are forwarded between cameras, media converter switches and other network devices. This especially useful when connecting the camera and media converter switch to the network in a daisy chain.

By changing the position of the dip switches, each network connector port in the media converter switch can be configured to manage multicasts in three different ways.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents
Axis Q6042-S PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q6042-S PTZ Dome Network Camera Table of Contents Technical Specifications Hardware Overview Hardware OverviewPressurize the Camera Recommended LED Indicators Connectors and ButtonsMulti-connector SD Card SlotMedia Converter Switch Connectors Hardware Overview Media Converter SwitchNetwork Connector Dip Switches Dip switch positionConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccessing the Product Access from the Internet Set the Root PasswordClick Use Https Go to Setup Events Accessing the Product Live ViewControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarAxis Q6042-S PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6042-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Click Save to apply the new settingsImage 264Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsOverlay Image Go to Video Video Stream and select the Image tabUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Axis Q6042-S PTZ Dome Network Camera Live View Config Live View ConfigViewer Settings Default Viewer for BrowsersUser Defined Links Output ButtonsGo to Setup Live View Config Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Gatekeeper ConfigurationAutotracking Exclude AreasTour Recording Guard TourTo add a guard tour To add a recorded tourOsdi Zones AdvancedLimits Operator Same as administrator but with lower priority Control QueueControls Detectors Set Up Motion Detection WindowsDetectors Shock DetectionMotion Detection Parameters Applications Install ApplicationApplications Application LicensesAxis Q6042-S PTZ Dome Network Camera Events EventsSystem Setting Up an Action RuleTime PTZ ControlRecipients Fallback ActionRecipient Use with action Schedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add Events RecurrencesRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourGo to System Options Storage and click SD Card Network ShareTo add a network share Go to System Options Storage Click Network ShareMaintenance System Options Ports & DevicesSupport Logs & Reports Plain ConfigScripting File UploadSystem Options Reset to Factory Default Settings Multi-Connector Cable Multi-Connector CableFunction Pin wire Specifications Activated, floating unconnected when Drain, 100 mATroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsWhen using ARP/Ping Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Video Camera Settings Video and image problems, generalStorage and disk management problems Media converter switchTechnical Specifications Technical SpecificationsInstallation aid Function/group Specifications System ApplicationMaintenance Integration Programming InterfacePower Function/group Specifications General CasingConnectors WeightTechnical Specifications Media Converter Switch Connectors Camera ConnectorsExternal Connectors Collector 100 mA Performance ConsiderationsM1.8
Top Page Image Contents