Kenwood KDC-X717 instruction manual Security Code In Stand by mode

Page 34

Menu settings

English

Security Code <In Stand by mode>

When the battery is removed from the unit's power switch, you cannot turn on the unit again unless the preset security code is input. This function helps prevent theft.

NOTE

You must follow steps 1 to 8 to be able to use the Security Code function. Turning off the power during the procedure will deactivate the security code setting.

Once the security code function has been activated, "Security" disappears from the MENU system. Note that it will no longer be possible to cancel this function afterwards.

1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.

2Select the four digits to use in your security code.

NOTE

The four-digit security code is very important, as you will need it to turn the unit on again when the code security function is on. Choose the number carefully and do not forget it (write it down and keep it separately in a safe place).

3Press the MENU button for at least one second.

"MENU" is displayed first and then "Security" is displayed.

4Press either the 4 or ¢ button for at least one second. "ENTER" will appear in the display for one second, indicating the code setting mode has been entered. When "CODE" appears in the display, you can start inputting the code.

5Press the preset button and enter the security code that you have selected in step 2.

Example: Use "3510" as the security code.

Step

Button to press

# Times

Display

pressed

 

 

 

1

#1

4

“3”

2

#2

6

“5”

3

#3

2

“1”

4

#4

1

“0”

6Press the DISP button for at least three seconds. The security code will be set.

"RE-ENTER" will appear in the display for one second, asking you to enter the code once again for confirmation. When "CODE" appears in the display, you can start inputting the code.

7Press the Preset button and input the security code again.

8Press the DISP button again for at least three seconds. "APPROVED" will appear in the display, with the security code function turning on. From this point on, if the unit is disconnected from the battery, the security code must be entered the first time that the unit's power is turned on. "ENTER" and "CODE" will appear in the display, asking you to input the code.

NOTE

If you input an incorrect security code, the code setting mode will be canceled automatically. Follow the steps from 4 to 8 above again.

If you press the RESET button or remove the battery:

The first time you turn the unit on again, "CODE" will appear in the display, asking you to input the security code.

Repeat steps 7 and 8 above, and input the security code. You can start operating the unit again when "APPROVED" appears in the display.

If you enter the incorrect code, the power will turn off. Enter the correct code to turn the unit on.

— 34 —

Page 33 Page 35
Image 34
Page 33 Page 35
Contents KDC-X917 KDC-X817 KDC-9017 KDC-X717 Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsCleaning the Unit Cleaning the CD SlotCleaning the Faceplate Terminals Lens FoggingStoring CDs Cleaning CDsHandling Compact discs Checking New CDs for BurrsDo Not Use Special Shape CDs Do Not Load CD AccessoriesRemoving the CD Do Not Use CDs with Sticker on the Labeled SidePower General featuresPower ON/OFF Switching Modes VolumeAttenuator Loudness Speaker & Woofer settingSwitching the Preset Sound Setting System QSource mode Faceplate Angle AdjustmentSwitching Full-Screen Display Stand by modeTuner mode Switching the Upper Part DisplaySwitching the Lower Part Display CD/External disc control modeCD/External disc control mode Removing the Faceplate Forced ClosingRemoving the faceplate Reattaching the Faceplate Audio control featuresNon-Fading Output Turning non-fading output On/OffBass Level Audio Control SettingBass Center Frequency Bass Quality FactorMiddle Level Middle Center FrequencyTreble Level Middle Quality FactorHigh-pass Filter Frequency for Front Output Phase for Non-Fading OutputVolume Offset High-pass Filter Frequency for Rear OutputKDC-X917/X817/9017 Tuner featuresFrequency Station Preset Memory TuningAuto Memory Entry Direct Access Tuning Canceling Direct Access TuningStation Name Preset Snps Assigning NamesStation Name Preset Play Snpp RDS featuresCanceling mode during input Radio Text Scroll AlarmRDS Radio Data System Program Type PTY FunctionConfirming Program Type Registration of a station as a PTYSeeking the Selected Program Type To register a non-RDS station as a program typeCD/External disc control features Playing CDsFast Forwarding and Reversing Disc Play Playing Other Disc modeTrack Search Track / Disc Repeat Track ScanRandom Play Text Scroll Presetting Disc Names Dnps Magazine Random Play To cancel Dnpp mode Press the Dnpp button Disc Name Preset Play DnppCanceling Direct Disc Search While It Is Operating Rapid display forward / reverseEnding the menu mode Press the Menu button Menu settingsEnter the menu mode Menu SystemSecurity Code In Stand by mode If you press the Reset button or remove the batteryCalendar Mode Manual Time AdjustmentCalendar Adjustment Adjusting the dateEntering the month or day setting mode Memo ModeAutomatic Time Adjustment Inputting / Changing the textSelectable Illumination Switching Display ModeBrightness level adjustment Icon/Spectrum analyzer SelectDual Zone System In AUX mode Built-in Amp Mute Control In Stand by modeTime setting for removing the faceplate DimmerExternal Amp Control Switching to a Different Traffic Information StationTraffic Information Function Basic operations Basic Operations of remoteLoading and Replacing the Batteries Tuner features CD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals Battery +Locking the faceplate to the unit Installation non-Japanese carsInstallation non-Japanese cars Locking the faceplate to the unitRemoving the hard rubber frame Removing the UnitRemoving the Unit Installation Japanese-cars Installing Radio Bracket in Japanese-made Cars J-CarsTroubleshooting Guide Problem Possible Cause SolutionProblem Possible Cause Solution CD/External disc control mode No Panel AM tuner section Audio section SpecificationsFM tuner section CD player sectionRemarque Ar Audio Page Warranty Card WHO is Protected
Top Page Image Contents