Removing the Unit
■ Removing the hard rubber frame
English | Insert the removal tool into the indentations in the hard rubber | |
frame, and pull it gently until the lock is released. | ||
|
Accessory0
Removal tool
■Removing the Unit
1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.
2Remove the
3Insert the two removal tools deeply into the slots on each side, as shown.
Accessory4 | Catch facing up |
Accessory3
Removal tool
4Push upward the removal
tool toward the top, and pull out the unit halfway whilst pressing towards the inside.
2CAUTION
Be careful to avoid injury from the catch pins on the removal tool.
5Pull the unit all the way out with your hands, being
careful not to drop it.
— 46 —