Kenwood KDC-X717 instruction manual Connecting Wires to Terminals, Battery +

Page 44

English

Connecting Wires to Terminals

2WARNING

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.

2CAUTION

When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal.

Rear right output (Red) Rear left output (White)

Non-fading right output (Red) (KDC-X917/X817/X717 only)

Non-fading left output (White) (KDC-X917/X817/X717 only)

Front right output (Red)

Front left output (White)

FM/AM antenna input

NON REAR FADING FRONT

To KENWOOD disc changer/ DAB control input/ KPA-SD100/KPA-HD100/KPA- SS100

NOTE

To connect these leads, refer to the relevant instruction manuals.

If no connections are made, do not let the wire come out from the tab.

Fuse (10A)Wiring harness (Accessory1)

When using the optional power amplifier, connect to its power control terminal.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna.

To car light control switch

To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.

Ignition key switch

Car fuse box (Main fuse)

Battery +

–

P.CONT

ANT CONT

ILLUMI

EXT.

CONT.

Power control wire (Blue/White)

Motor antenna control wire (Blue)

Dimmer control wire (Orange / White)

External amplifier control wire

(Pink / Black) (KDC-X917/X817/X717 only)

ACC

Car fuse box	Ignition wire (Red)
Car fuse box
	Battery wire (Yellow)

Ground wire (Black) - (To car chassis)

White/Black
		To front left
FRONT • L	+	speaker
	White
Gray/Black
		To front right
FRONT • R	+	speaker
	Gray
Green/Black		To rear left
		To rear left
REAR • L	+	speaker
	Green
Purple/Black
		To rear right
REAR • R	+	speaker
	Purple

— 44 —

Image 44

Contents KDC-X917 KDC-X817 KDC-9017 KDC-X717 Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsCleaning the CD Slot Cleaning the Faceplate TerminalsCleaning the Unit Lens FoggingCleaning CDs Handling Compact discsStoring CDs Checking New CDs for BurrsDo Not Load CD Accessories Removing the CDDo Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled SidePower ON/OFF General featuresPower Attenuator VolumeSwitching Modes Speaker & Woofer setting Switching the Preset Sound SettingLoudness System QFaceplate Angle Adjustment Switching Full-Screen DisplaySource mode Stand by modeSwitching the Upper Part Display Switching the Lower Part DisplayTuner mode CD/External disc control modeCD/External disc control mode Removing the faceplate Forced ClosingRemoving the Faceplate Audio control features Non-Fading OutputReattaching the Faceplate Turning non-fading output On/OffAudio Control Setting Bass Center FrequencyBass Level Bass Quality FactorMiddle Center Frequency Treble LevelMiddle Level Middle Quality FactorPhase for Non-Fading Output Volume OffsetHigh-pass Filter Frequency for Front Output High-pass Filter Frequency for Rear OutputFrequency Tuner featuresKDC-X917/X817/9017 Auto Memory Entry TuningStation Preset Memory Direct Access Tuning Canceling Direct Access TuningStation Name Preset Snps Assigning NamesCanceling mode during input RDS featuresStation Name Preset Play Snpp Alarm RDS Radio Data SystemRadio Text Scroll Program Type PTY FunctionRegistration of a station as a PTY Seeking the Selected Program TypeConfirming Program Type To register a non-RDS station as a program typeCD/External disc control features Playing CDsTrack Search Playing Other Disc modeFast Forwarding and Reversing Disc Play Random Play Track ScanTrack / Disc Repeat Text Scroll Presetting Disc Names Dnps Magazine Random Play Disc Name Preset Play Dnpp Canceling Direct Disc Search While It Is OperatingTo cancel Dnpp mode Press the Dnpp button Rapid display forward / reverseMenu settings Enter the menu modeEnding the menu mode Press the Menu button Menu SystemSecurity Code In Stand by mode If you press the Reset button or remove the batteryManual Time Adjustment Calendar AdjustmentCalendar Mode Adjusting the dateMemo Mode Automatic Time AdjustmentEntering the month or day setting mode Inputting / Changing the textSwitching Display Mode Brightness level adjustmentSelectable Illumination Icon/Spectrum analyzer SelectBuilt-in Amp Mute Control In Stand by mode Time setting for removing the faceplateDual Zone System In AUX mode DimmerTraffic Information Function Switching to a Different Traffic Information StationExternal Amp Control Loading and Replacing the Batteries Basic Operations of remoteBasic operations Tuner features CD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals Battery +Installation non-Japanese cars Installation non-Japanese carsLocking the faceplate to the unit Locking the faceplate to the unitRemoving the Unit Removing the UnitRemoving the hard rubber frame Installation Japanese-cars Installing Radio Bracket in Japanese-made Cars J-CarsTroubleshooting Guide Problem Possible Cause SolutionProblem Possible Cause Solution CD/External disc control mode No Panel Specifications FM tuner sectionAM tuner section Audio section CD player sectionRemarque Ar Audio Page Warranty Card WHO is Protected