Kenwood KDC-X717 Dimmer, Built-in Amp Mute Control In Stand by mode, Dual Zone System In AUX mode

Page 38

Menu settings

English

Dimmer

You can dim the display.

NOTE

The dimmer function is not available for units if the dimmer wire is not connected.

Display and setting:

"Dimmer ON" : The dimmer setting is on. (Default setting)

"Dimmer OFF" : The dimmer setting is off.

Function of the KDC-X917

Built-in Amp Mute Control <In Stand by mode>

Toggles on or off the mute control on the built-in amplifier. Turning on this control enhances the preout quality.

Display and setting:

"Builtin AMP Mute ON" : Built-in Amp Mute is ON.

"Builtin AMP Mute OFF" : Built-in Amp Mute is OFF. (Default

setting)

Time setting for removing the faceplate

You can set the interval during which the open control panel cannot reverse to be hidden. During the period you have set, the faceplate can be removed from the faceplate bracket.

Display and setting:

"Off Wait" : 0sec / 3sec (Default setting) / 5sec / 10sec / 15sec / 20sec / 25sec (sec=seconds)

Function of the KDC-X917/KDC-X817/KDC-X717

System Q

When this system is set to on, the System Q factors (Bass center frequency, Bass quality factor, Bass extend, Middle center frequency, Middle quality factor, and Treble center frequency) appear during the audio control mode.

Display and setting:

"System Q ON" : The System Q factors appear and can be adjusted. (Default setting)

"System Q OFF" : The System Q factors are not appeared.

Dual Zone System <In AUX mode>

The following operation allows separate sound sources to control the output of the front and rear speakers. The Dual zone system can only be switched on or off when the source is set to the AUX mode.

Display and setting:

"Zone 2 ON" : The dual zone system function is on.

"Zone 2 OFF" : The dual zone system function is off. (Default setting)

NOTE

•You must purchase the optional KCA-S210A/CA-C1AX/KDC- CPS82/KDC-CX82/KDC-CPS85/KDC-CX85/KDC-CPS87/KDC- CX87 device before you can use this function.

•You can choose to send the AUX input through the rear channel, and the unit’s tuner or audio source through the front channel.

•The Bass, Middle, Treble and Loudness adjustments do not affect the rear channel.

•When the Dual zone system is turned on, the External disc control features cannot be used.

•When you set the Dual zone system to on while the non-fading preout is switched on, the sound of the non-fading preout does not be outputted.

— 38 —

Image 38

Contents KDC-X917 KDC-X817 KDC-9017 KDC-X717 Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsCleaning the Unit Cleaning the CD SlotCleaning the Faceplate Terminals Lens FoggingStoring CDs Cleaning CDsHandling Compact discs Checking New CDs for BurrsDo Not Use Special Shape CDs Do Not Load CD AccessoriesRemoving the CD Do Not Use CDs with Sticker on the Labeled SidePower ON/OFF General featuresPower Attenuator VolumeSwitching Modes Loudness Speaker & Woofer settingSwitching the Preset Sound Setting System QSource mode Faceplate Angle AdjustmentSwitching Full-Screen Display Stand by modeTuner mode Switching the Upper Part DisplaySwitching the Lower Part Display CD/External disc control modeCD/External disc control mode Removing the faceplate Forced ClosingRemoving the Faceplate Reattaching the Faceplate Audio control featuresNon-Fading Output Turning non-fading output On/OffBass Level Audio Control SettingBass Center Frequency Bass Quality FactorMiddle Level Middle Center FrequencyTreble Level Middle Quality FactorHigh-pass Filter Frequency for Front Output Phase for Non-Fading OutputVolume Offset High-pass Filter Frequency for Rear OutputFrequency Tuner featuresKDC-X917/X817/9017 Auto Memory Entry TuningStation Preset Memory Direct Access Tuning Canceling Direct Access TuningStation Name Preset Snps Assigning NamesCanceling mode during input RDS featuresStation Name Preset Play Snpp Radio Text Scroll AlarmRDS Radio Data System Program Type PTY FunctionConfirming Program Type Registration of a station as a PTYSeeking the Selected Program Type To register a non-RDS station as a program typeCD/External disc control features Playing CDsTrack Search Playing Other Disc modeFast Forwarding and Reversing Disc Play Random Play Track ScanTrack / Disc Repeat Text Scroll Presetting Disc Names Dnps Magazine Random Play To cancel Dnpp mode Press the Dnpp button Disc Name Preset Play DnppCanceling Direct Disc Search While It Is Operating Rapid display forward / reverseEnding the menu mode Press the Menu button Menu settingsEnter the menu mode Menu SystemSecurity Code In Stand by mode If you press the Reset button or remove the batteryCalendar Mode Manual Time AdjustmentCalendar Adjustment Adjusting the dateEntering the month or day setting mode Memo ModeAutomatic Time Adjustment Inputting / Changing the textSelectable Illumination Switching Display ModeBrightness level adjustment Icon/Spectrum analyzer SelectDual Zone System In AUX mode Built-in Amp Mute Control In Stand by modeTime setting for removing the faceplate DimmerTraffic Information Function Switching to a Different Traffic Information StationExternal Amp Control Loading and Replacing the Batteries Basic Operations of remoteBasic operations Tuner features CD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals Battery +Locking the faceplate to the unit Installation non-Japanese carsInstallation non-Japanese cars Locking the faceplate to the unitRemoving the Unit Removing the UnitRemoving the hard rubber frame Installation Japanese-cars Installing Radio Bracket in Japanese-made Cars J-CarsTroubleshooting Guide Problem Possible Cause SolutionProblem Possible Cause Solution CD/External disc control mode No Panel AM tuner section Audio section SpecificationsFM tuner section CD player sectionRemarque Ar Audio Page Warranty Card WHO is Protected