qPower cable (12 V DC or 24 V AC)
Cautions:
•Supplies 24 V AC or 12 V DC from an external power source.
•Supplies 220 V to 240 V AC from an external power source.
wVideo output cable with BNC connec- tor
Connects wih the video connector.
eEnclosure
rFocus lever
Fixes the focus position after adjusting.
tZoom lever
Fixes the zoom position after adjusting.
yTilting lock screw
Fixes the tilting position after adjusting.
uAzimuth (Angle adjuster)
Shoots in a
iPanning table
Adjusts the panning angle of the camera.
oPanning lock screw
Fixes the panning position after adjust- ing.
!0Camera lock screw
Fixes the camera and camera attach- ment.
!1Monitor output jack (3.5 diam. mini jack)
Connects the LCD monitor and such devices with 3.5 diam.
!2Optional heater connector (6 pin female)
When an optional heater unit is installed in the camera, the harness exiting from the unit will be connected to this.
!3LED indicator
Shows the ABF status.
!4Operation buttons
!5SET button [(SET), ABF2/MENU]
Activates an item selected in the setup menu. Refer to p. 17 for details on the [ABF2] button.
!6DOWN button [(DOWN), ABF1]
Moves the cursor downward and selects items in the setup menu. Refer to p. 21 for details on the [ABF1] function.
!7UP button (UP)
Moves the cursor upward and selects items in the setup menu.
!8LEFT button [(LEFT), NEAR]
Moves the cursor to the left, selects the mode and adjusts some levels.
!9RIGHT button [(RIGHT), FAR]
Moves the cursor to the right, selects the mode and adjusts some levels.
11