Panasonic WV-CW480S operating instructions Setting Procedures, Language Setup Language Setup

Setting Procedures

First, select a language for menu display and camera ID display.

Language Setup (LANGUAGE SETUP)

1.Select LANGUAGE on the top menu and

press the [SET] button.

→ The LANGUAGE SETUP menu opens.

2.Select a language. The default setting is English.

**LANGUAGE SETUP**

LANGUAGE ENGLISH

SET

RET TOP END

Available languages: ENGLISH, FRANÇAIS,

ESPAÑOL, DEUTSCH, ITALIANO, êìëëäàâ, CHINESE, JAPANESE

3.Select SET on the menu and press the [SET] button.

1.Camera Identification Setting (CAMERA ID)

Assign a name to the camera using up to 16 characters to display it overlaying on the camera

picture in the selected position.
Note: If you change the language selection after			**CAMERA	SETUP**	1/2
the assignment of camera ID, it will be	CAMERA ID			OFF↵
	ALC			ALC↵
erased.	SHUTTER			OFF
	AGC			ON(HIGH)
	SENS UP			OFF
1. On the CAMERA SETUP menu, select ON↓ or	SYNC			INT
	WHITE BAL			↵
				ATW1
OFF↓ for CAMERA ID and press the [SET]	MOTION DET			OFF
	DNR			HIGH
button.	RESOLUTION			HIGH
ON↓: Displays entered camera ID.	BW MODE↵
OFF↓: Does not display the ID.						Character
→ The CAMERA ID menu opens.
		CAMERA ID				Cursor
2. Select a character from the character area		0	123456789
			ABCDEFGHIJKLM			Character
and press the [SET] button.		NOPQRSTUVWXYZ
	().,'":;&#!?=					Area
→ The selected characters are displayed in	+-*/%$
the editing area.		SPACE POSI				Command
		RET TOP END RESET

3.Repeat these procedures until all characters are entered.

•To enter a blank space, select SPACE and press the [SET] button.

•To replace a specific character in the editing area:

1.Move the cursor to the editing area and then move the pointer to the character to be replaced pressing the [LEFT] and [RIGHT] buttons.

2.Move the cursor to a candidate character in the character area and press the [SET] button.

................	Editing
	Area
	Pointer
FLOOR 1	Highlighted

29