Panasonic WV-CW480S Motion Detection Setting Motion DET, AWC Setting, Manual Fine Adjustment

Page 34
LEVEL DWELL TIME
DISPLAY MODE↵
ALARM
MASK SET↵
** MODE1 **

AWC Setting

1.Select AWC and press the [LEFT] button.

→AWC will change to AWC → PUSH SW.

2.Press the [SET] button.

→PUSH SW will be highlighted while the AWC setting is performed.

Note: If the white balance is not set, PUSH SW is being highlighted. 3 . Press the [RIGHT] button.

Manual Fine Adjustment

Perform fine adjustment as necessary.

1.Select WHITE BAL and press the [SET] but- ton.

→Fine adjustment menu of ATW or AWC will open.

2.Adjust finely R (Red) and B (Blue) gain by moving the "I" cursor.

**ATW1**

R...I...128

- +

B...I...128

- +

RET TOP END

8. Motion Detection Setting (MOTION DET)

When a series of changes in pictures is detected, the camera outputs an alarm to the external device such as a disk recorder. The recorder will start recording the pictures.

1.Select a mode for MOTION DET on the CAMERA SETUP menu. The default setting is OFF.

OFF: Disables the alarm output.

MODE1: Outputs alarm when a series of

motions is detected.

MODE2: Outputs alarm when a series of scene changes is detected.

→ The MODE1 menu opens when you select MODE1 and press the [SET] button.

2.

Adjust for LEVEL to optimize the sensitivity of

RET TOP END

 

 

 

detection.

 

 

3.

Select a dwell time. The default setting is 2S.

 

 

 

 

 

 

 

 

 

Available time (second): 2, 5, 10, 30

 

 

 

The next detection will be performed after

 

 

 

the set time elapses.

 

 

...I..128

-+

2S

OFF

4. Select MASK SET and press the [SET] but- ton.

→ A 48-split screen opens.

•Specify non-detection (mask) and detection areas in the same way as described earlier in 2-2 ALC Mode.

•Hold down the [SET] button for 2 seconds to return to the MODE1 menu.

Note: Perform the setting of mask area after STABILIZER in the CAMERA SETUP menu is set to OFF.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents WV-CW480S English Version Contents Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityFeatures PrefacePrecautions Installing place Observe the following for installationAvoid installing in the following locations About the dehumidifying deviceConsumable parts What to do if Over Heat appears on the displayMajor Operating Controls and Their Functions 2Optional heater connector 6 pin female Power cable 12 V DC or 24 V ACAzimuth Angle adjuster 3LED indicatorInstallations Using a Junction Box Installations WV-CW484FUsing Mounting Bracket WV-Q114 Option Installations WV-CW480S Using Provided Mounting BracketFixing the camera attachment to the mounting bracket How to mount the camera WV-CW484F, WV-CW480SWV-CW484F WV-CW480S Protrusion Screw hole of camera attachment Rear screw Camera fixing screw Waterproof processing of cable connection Waterproof ProcessWinding the provided butyl tape Downward Image Adjustment Zoom/focus adjustment How to use a variable focal lensWire Colours & Functions Camera power cable WV-CW484F Power ConnectionPrecaution ConnectionsCable Length and Wire Gauge WV-CW484F DC Class 2 Power SUPPLY. WV-CW484FOptional Heater Unit WV-CW4H InstallationIntroduction Settings items of the camera setup About Setup MenusSetup item Description Language Basic operation Page Language Setup Language Setup Setting ProceduresCamera Identification Setting Camera ID ALC Mode with SUPER-D3 on Light Control Mode Setting ALCSuper Dynamic 3 Function SUPER-D3 Shutter Speed Setting Shutter ALC Mode with SUPER-D3 OFFGain Control Setting AGC Electronic Sensitivity Enhancement Sens UPSynchronization Setting Sync White Balance Setting White BALManual Fine Adjustment Motion Detection Setting Motion DETAWC Setting Available time second 2, 5, 10Demo Mode Motion DetectorBlack and White Mode Setting BW Mode Digital Noise Reduction Setting DNRResolution Setting Resolution About MODE2 of Motion DetectionPrivacy Zone Setting Privacy Zone Camera Picture Upside Down Positioning UPSIDE-DOWN Electronic Zoom EL-ZOOMAuto Image Stabilizer Stabilizer Back-focus Setting BACK-FOCUS Setup LensSpecial Menu Special Setup Chroma Level Setting Chroma GainPedestal Level Setting Pedestal Aperture Gain Setting AP GainPixel Compensation Setting PIX OFF To reset to the default settings Camera Reset Serial number of the camera will be displayed. SER. noTroubleshooting SymptomWV-CW480S General specifications SpecificationsWV-CW484F General specifications CameraLens INTOptional Accessories Standard AccessoriesFor business users in the European Union Page Osaka, Japan Http//panasonic.net

WV-CW480S specifications

The Panasonic WV-CW480S is an advanced network camera specifically designed for high-performance surveillance in various environments. This camera is particularly known for its exceptional image quality and versatility, making it an ideal choice for both indoor and outdoor applications.

One of the key features of the WV-CW480S is its high-resolution imaging capability, providing 720p HD video output. This resolution allows for a clearer and more detailed view of monitored areas, enabling users to identify faces and license plates with ease. The camera employs a progressive scan CCD sensor which enhances the image quality, particularly in situations with varying light conditions.

Another standout technology in the WV-CW480S is its Wide Dynamic Range (WDR) feature. This technology helps the camera capture clear images in scenes with both bright and dark areas. It achieves this by processing multiple images taken at different exposures and combining them into a single image. This capability is crucial for effectively monitoring areas like entrances or parking lots, where lighting conditions can fluctuate dramatically.

The WV-CW480S also includes excellent low-light performance, which is aided by its integrated IR (infrared) illuminators. This allows the camera to maintain high-quality video even in complete darkness, making it effective for 24/7 surveillance. Additionally, the camera's intelligent digital noise reduction helps to enhance image clarity in low-light situations without compromising on detail.

Moreover, the camera is equipped with advanced motion detection capabilities. Users can set specific areas for motion detection, allowing for customized monitoring and reducing false alarms. This feature can be particularly useful in busy environments, ensuring that critical events are captured without unnecessary alerts.

The WV-CW480S is designed with ease of installation in mind. Its compact and robust construction allows for flexible mounting options, making it suitable for a variety of settings. Furthermore, the camera supports Power over Ethernet (PoE), simplifying wiring and reducing installation costs.

In summary, the Panasonic WV-CW480S is a powerful surveillance tool that combines high-resolution imaging, WDR technology, and excellent low-light performance. Its advanced features cater to a wide range of surveillance needs, making it a reliable choice for businesses and security professionals looking to enhance their monitoring capabilities. With its versatile design and advanced technologies, the WV-CW480S stands out in the field of security cameras.
Top Page Image Contents