Panasonic WV-CW480S operating instructions Motion Detector, Demo Mode

Page 35

5.Select ON or OFF for ALARM under DISPLAY MODE. ON: Outputs an alarm

OFF: Does not output an alarm. This is applicable any of the following controllers are used: WV-RM70, WV-CU550 series, WV-CU161, WV-CU360, WV-CU650, WV-CU850, WV- CU950

6.Select DISPLAY MODE and press the [SET] button to see the current settings. When a motion is detected, the area will blink.

•Press the [SET] button to return to the MODE1 menu.

7.As necessary, repeat to perform LEVEL adjustment and MASK setting by checking on the DISPLAY MODE screen.

Notes:

•In systems other than Panasonic, select OFF for MOTION DET to prevent system devices from confusing time-code signal with alarm signal.

•Set MASK SET over the areas where leaves or curtains etc. are swaying.

•Adjust the detection level to prevent detection from confusing motion with noise under low light conditions.

•It takes around 0.2 seconds for the alarm signal to reach the VTR’s alarm terminal after detection.

•The motion/scene change detection is not specifically intended to prevent theft or fire.

Motion Detector

The motion detector divides the screen into 48 blocks and monitors changes in the lumi- nance in each block. When it detects any change (movement) in the image, it outputs an alarm signal. When a change (movement) in the image is detected while in the auto mode, the alarm signal is output and the camera stops at the preset position for a speci- fied amount of time.

Demo Mode

The demo mode divides the screen into 48 blocks and monitors changes in the lumi- nance in each block. It also masks any part of the picture where there is a change in average luminance that exceeds the currently specified detection sensitivity level. The demo mode results can be used to determine the optimum detection sensitivity level (step 5) and the areas of the screen that need to be masked (step 1).

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents WV-CW480S English Version Contents Important Safety Instructions Limitation of Liability Disclaimer of WarrantyPreface FeaturesPrecautions About the dehumidifying device Observe the following for installationAvoid installing in the following locations Installing placeWhat to do if Over Heat appears on the display Consumable partsMajor Operating Controls and Their Functions 3LED indicator Power cable 12 V DC or 24 V ACAzimuth Angle adjuster 2Optional heater connector 6 pin femaleInstallations Using Mounting Bracket WV-Q114 Option Installations WV-CW484FUsing a Junction Box Using Provided Mounting Bracket Installations WV-CW480SWV-CW484F WV-CW480S How to mount the camera WV-CW484F, WV-CW480SFixing the camera attachment to the mounting bracket Protrusion Screw hole of camera attachment Rear screw Camera fixing screw Winding the provided butyl tape Waterproof ProcessWaterproof processing of cable connection Downward Image Adjustment How to use a variable focal lens Zoom/focus adjustmentConnections Power ConnectionPrecaution Wire Colours & Functions Camera power cable WV-CW484FDC Class 2 Power SUPPLY. WV-CW484F Cable Length and Wire Gauge WV-CW484FIntroduction InstallationOptional Heater Unit WV-CW4H Setup item Description About Setup MenusSettings items of the camera setup Language Basic operation Page Camera Identification Setting Camera ID Setting ProceduresLanguage Setup Language Setup Super Dynamic 3 Function SUPER-D3 Light Control Mode Setting ALCALC Mode with SUPER-D3 on ALC Mode with SUPER-D3 OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Gain Control Setting AGCWhite Balance Setting White BAL Synchronization Setting SyncAvailable time second 2, 5, 10 Motion Detection Setting Motion DETAWC Setting Manual Fine AdjustmentMotion Detector Demo ModeAbout MODE2 of Motion Detection Digital Noise Reduction Setting DNRResolution Setting Resolution Black and White Mode Setting BW ModePrivacy Zone Setting Privacy Zone Auto Image Stabilizer Stabilizer Electronic Zoom EL-ZOOMCamera Picture Upside Down Positioning UPSIDE-DOWN Lens Back-focus Setting BACK-FOCUS SetupChroma Level Setting Chroma Gain Special Menu Special SetupPixel Compensation Setting PIX OFF Aperture Gain Setting AP GainPedestal Level Setting Pedestal Serial number of the camera will be displayed. SER. no To reset to the default settings Camera ResetSymptom TroubleshootingCamera SpecificationsWV-CW484F General specifications WV-CW480S General specificationsINT LensFor business users in the European Union Standard AccessoriesOptional Accessories Page Osaka, Japan Http//panasonic.net

WV-CW480S specifications

The Panasonic WV-CW480S is an advanced network camera specifically designed for high-performance surveillance in various environments. This camera is particularly known for its exceptional image quality and versatility, making it an ideal choice for both indoor and outdoor applications.

One of the key features of the WV-CW480S is its high-resolution imaging capability, providing 720p HD video output. This resolution allows for a clearer and more detailed view of monitored areas, enabling users to identify faces and license plates with ease. The camera employs a progressive scan CCD sensor which enhances the image quality, particularly in situations with varying light conditions.

Another standout technology in the WV-CW480S is its Wide Dynamic Range (WDR) feature. This technology helps the camera capture clear images in scenes with both bright and dark areas. It achieves this by processing multiple images taken at different exposures and combining them into a single image. This capability is crucial for effectively monitoring areas like entrances or parking lots, where lighting conditions can fluctuate dramatically.

The WV-CW480S also includes excellent low-light performance, which is aided by its integrated IR (infrared) illuminators. This allows the camera to maintain high-quality video even in complete darkness, making it effective for 24/7 surveillance. Additionally, the camera's intelligent digital noise reduction helps to enhance image clarity in low-light situations without compromising on detail.

Moreover, the camera is equipped with advanced motion detection capabilities. Users can set specific areas for motion detection, allowing for customized monitoring and reducing false alarms. This feature can be particularly useful in busy environments, ensuring that critical events are captured without unnecessary alerts.

The WV-CW480S is designed with ease of installation in mind. Its compact and robust construction allows for flexible mounting options, making it suitable for a variety of settings. Furthermore, the camera supports Power over Ethernet (PoE), simplifying wiring and reducing installation costs.

In summary, the Panasonic WV-CW480S is a powerful surveillance tool that combines high-resolution imaging, WDR technology, and excellent low-light performance. Its advanced features cater to a wide range of surveillance needs, making it a reliable choice for businesses and security professionals looking to enhance their monitoring capabilities. With its versatile design and advanced technologies, the WV-CW480S stands out in the field of security cameras.
Top Page Image Contents