Panasonic WV-CW480S Specifications, WV-CW484F General specifications, Camera

Page 44

Specifications

<WV-CW484F General specifications>

Power source and power

 

consumption:

24 V AC 50 Hz, 4.1 W (Without heater), 11 W (With heater),

 

12 V DC 50 Hz, 340 mA (Without heater), 470 mA (With heater)*

Ambient temperature:

–10 °C to +50 °C

 

–30 °C to +50 °C**

Ambient humidity:

90 % or less

Water resistance:

IEC60529 (IP66, Against ingress of water with harmful effects

 

powerful jetting)*** (Camera unit)

Dimensions:

ø154 mm (W) x 141.2 mm (H) (excluding connectors/terminals)

Weight:

Camera: 1.3 kg

 

Camera attachment: 100 g

<WV-CW480S General specifications>

Power source and power

 

consumption:

220 V to 240 V AC 50 Hz, 7 W (Without heater),

 

13 W (With heater)

Ambient temperature:

–10 °C to +50 °C

 

–30 °C to +50 °C**

Ambient humidity:

90 % or less

Water resistance:

IEC60529 (IP66, Against ingress of water with harmful effects

 

powerful jetting)*** (Camera unit)

Dimensions:

ø160 mm (W) x 161.7 mm (H) (excluding connectors/terminals)

Weight:

Camera: 1.5 kg

 

Camera attachment: 80 g

Mounting bracket:

550 g

*Heater Unit WV-CW4H (option) is not available with 12 V DC power supply.

**With Heater Unit WV-CW4H (option)

***Applicable only when the installation and waterproof process are done properly.

Camera

 

 

Image sensor:

1/3 inch interline transfer CCD

Effective pixels:

752 (H) x 582 (V)

Scanning area:

4.8 (H) x 3.6 (V) mm

Scanning system:

2 : 1 interlace scan

Scanning lines:

625 lines

 

Scanning frequency:

Horizontal: 15.625 kHz

 

Vertical:

50.00 Hz

Resolution:

Horizontal: 480 TV lines (C/L Normal), 540 TV lines typ., 520 TV

 

 

lines min. (C/L High), 570 TV lines (B/W)

 

Vertical:

400 TV lines min. (Centre)

Video output:

1.0 V[P-P] PAL composite 75 /BNC connector

Signal-to-noise ratio:

50 dB (Equivalent to AGC Off, weight On)

Dynamic range:

54 dB typ

 

44

Image 44
Contents WV-CW480S English Version Contents Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityFeatures PrefacePrecautions Observe the following for installation Avoid installing in the following locationsInstalling place About the dehumidifying deviceConsumable parts What to do if Over Heat appears on the displayMajor Operating Controls and Their Functions Power cable 12 V DC or 24 V AC Azimuth Angle adjuster2Optional heater connector 6 pin female 3LED indicatorInstallations Using Mounting Bracket WV-Q114 Option Installations WV-CW484FUsing a Junction Box Installations WV-CW480S Using Provided Mounting BracketWV-CW484F WV-CW480S How to mount the camera WV-CW484F, WV-CW480SFixing the camera attachment to the mounting bracket Protrusion Screw hole of camera attachment Rear screw Camera fixing screw Winding the provided butyl tape Waterproof ProcessWaterproof processing of cable connection Downward Image Adjustment Zoom/focus adjustment How to use a variable focal lensPower Connection PrecautionWire Colours & Functions Camera power cable WV-CW484F ConnectionsCable Length and Wire Gauge WV-CW484F DC Class 2 Power SUPPLY. WV-CW484FIntroduction InstallationOptional Heater Unit WV-CW4H Setup item Description About Setup MenusSettings items of the camera setup Language Basic operation Page Camera Identification Setting Camera ID Setting ProceduresLanguage Setup Language Setup Super Dynamic 3 Function SUPER-D3 Light Control Mode Setting ALCALC Mode with SUPER-D3 on Shutter Speed Setting Shutter ALC Mode with SUPER-D3 OFFGain Control Setting AGC Electronic Sensitivity Enhancement Sens UPSynchronization Setting Sync White Balance Setting White BALMotion Detection Setting Motion DET AWC SettingManual Fine Adjustment Available time second 2, 5, 10Demo Mode Motion DetectorDigital Noise Reduction Setting DNR Resolution Setting ResolutionBlack and White Mode Setting BW Mode About MODE2 of Motion DetectionPrivacy Zone Setting Privacy Zone Auto Image Stabilizer Stabilizer Electronic Zoom EL-ZOOMCamera Picture Upside Down Positioning UPSIDE-DOWN Back-focus Setting BACK-FOCUS Setup LensSpecial Menu Special Setup Chroma Level Setting Chroma GainPixel Compensation Setting PIX OFF Aperture Gain Setting AP GainPedestal Level Setting Pedestal To reset to the default settings Camera Reset Serial number of the camera will be displayed. SER. noTroubleshooting SymptomSpecifications WV-CW484F General specificationsWV-CW480S General specifications CameraLens INTFor business users in the European Union Standard AccessoriesOptional Accessories Page Osaka, Japan Http//panasonic.net

WV-CW480S specifications

The Panasonic WV-CW480S is an advanced network camera specifically designed for high-performance surveillance in various environments. This camera is particularly known for its exceptional image quality and versatility, making it an ideal choice for both indoor and outdoor applications.

One of the key features of the WV-CW480S is its high-resolution imaging capability, providing 720p HD video output. This resolution allows for a clearer and more detailed view of monitored areas, enabling users to identify faces and license plates with ease. The camera employs a progressive scan CCD sensor which enhances the image quality, particularly in situations with varying light conditions.

Another standout technology in the WV-CW480S is its Wide Dynamic Range (WDR) feature. This technology helps the camera capture clear images in scenes with both bright and dark areas. It achieves this by processing multiple images taken at different exposures and combining them into a single image. This capability is crucial for effectively monitoring areas like entrances or parking lots, where lighting conditions can fluctuate dramatically.

The WV-CW480S also includes excellent low-light performance, which is aided by its integrated IR (infrared) illuminators. This allows the camera to maintain high-quality video even in complete darkness, making it effective for 24/7 surveillance. Additionally, the camera's intelligent digital noise reduction helps to enhance image clarity in low-light situations without compromising on detail.

Moreover, the camera is equipped with advanced motion detection capabilities. Users can set specific areas for motion detection, allowing for customized monitoring and reducing false alarms. This feature can be particularly useful in busy environments, ensuring that critical events are captured without unnecessary alerts.

The WV-CW480S is designed with ease of installation in mind. Its compact and robust construction allows for flexible mounting options, making it suitable for a variety of settings. Furthermore, the camera supports Power over Ethernet (PoE), simplifying wiring and reducing installation costs.

In summary, the Panasonic WV-CW480S is a powerful surveillance tool that combines high-resolution imaging, WDR technology, and excellent low-light performance. Its advanced features cater to a wide range of surveillance needs, making it a reliable choice for businesses and security professionals looking to enhance their monitoring capabilities. With its versatile design and advanced technologies, the WV-CW480S stands out in the field of security cameras.