Precautions
This apparatus has no power switch.
Power is supplied from an external 12 V DC/ 24 V AC
To keep on using with stable performance
•Parts of this product may deteriorate and it may shorten lifetime of this product when using in locations subject to high temperatures and high humidity. Do not expose the product to direct heat such from a heater.
•Use the appliance at temperature within
With the optional Heater Unit
Do not drop metallic parts through slots.
This could permanently damage the appara- tus. Turn the power off immediately and con- tact qualified service personnel for service.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
Do not attempt to disassemble the cam- era.
To prevent electric shock, do not remove screws or covers.
There are no
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.
Do not touch the dome cover with your bare hands.
A dirty dome cover causes deterioration of picture quality.
Cleaning the camera body
Turn the power off when cleaning the cam- era. Use a dry cloth to clean the camera. Do not use strong abrasive detergent when cleaning the camera body. When the dirt is hard to remove, use a mild detergent and wipe gently. Then, wipe off the remaining detergent with a dry cloth.
Otherwise, it may cause discolouration. When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.
Discolouration on the CCD colour filter
When continuously shooting a bright light source such as a spotlight, the colour filter of the CCD may have deteriorated and it may cause discolouration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discolouration may remain.
Do not aim the apparatus at strong light sources.
A light source such as a spot light causes a blooming (light bleeding) or a smear (vertical lines).
Smear | Bright subject |
Blooming
7