Axis Communications AXIS 223M user manual Live View, Layout

Page 10

10AXIS 223M - Accessing the Camera

2.	Set the DC-Iris to Disabled	Zoom puller
	and click Save.	(Tele/wide)
	and click Save.
3.	Unscrew the zoom puller on
	the lens by turning it

anti-clockwise. Adjust the	Focus puller
anti-clockwise. Adjust the
zoom setting as required.
Re-tighten the zoom puller.

4.Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus puller.

5.From the Focus adjustment page, set the DC-Iris to Enabled and click Save.

Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set with this method it will then be maintained in any light conditions.

The Live View page

Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible.

The Video format drop-down list allows the video format on the Live View page to be temporarily changed.

The Output buttons, Pulse and Active/Inactive below, control the output directly from the Live View page. These buttons are configured under Setup > Live View Config >

Layout.

Pulse - click this button to activate the output for a defined period of time, such as switching on a light for 20 seconds.

Active/Inactive - click these buttons to manually start and stop a connected device, such as switching a light on/off.

These buttons start and stop the Sequence Mode. This mode is created in Setup > Live View Config > Sequence mode, and automatically displays the view from two or more video sources at set intervals.

From the Source list, select the desired external video source. Note that Sequence Mode must be stopped before selecting a source from this list.

The Trigger buttons can trigger an event directly from the Live View page. These are configured under Setup > Live View Config > Layout.

Image 10

Contents Axis 223M Network Camera User’s Manual About this Document Contents Axis 223M Product Features Product Overview LED Accessing the Camera Access from a browserAccessing the camera from the Internet Setting the root passwordSetting the focus Live View LayoutAMC Audio controls Video stream types Video StreamsMotion Jpeg How to stream MPEG-4 MPEG-4 protocols and communication methodsAxis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Setup link Accessing the Setup link from a browserImage settings Video and Image SettingsImage Overlay/Mask Overlay/Mask typeUpload and use an overlay/mask AdvancedOverlay image requirements Camera Settings MPEG-4 Settings Mjpeg Settings Enable Audio Audio SettingsAudio Audio Channels Audio InputAudio Output Custom Settings dialog Live View ConfigLayout Default Video Format Default ViewerViewer settings Action ButtonsUser Defined Links Html ExamplesExternal Video Check Show custom LinkSequence Mode Event Servers Event ConfigurationEvent Types How to set up a triggered event Triggered eventPre-trigger and Post-trigger buffers Scheduled EventCamera Tampering SettingsMotion Detection Object size, history and sensitivity Port Status ExamplesSecurity System OptionsUsers IP Address Filtering HttpsIeee Authentication process CA serversDate & Time Basic TCP/IP SettingsNetwork Advanced TCP/IP Settings Axis 223M System Options ServicesLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT Traversal port mapping for IPv4FTP Network TrafficQoS QoS Quality of ServiceSmtp email Bonjour Ports & DevicesUPnP PortsSystem Overview MaintenanceSupport Logs & ReportsAxis 223M System Options Information Using the Control Button Resetting to the factory default settingsAbout Unit Connectors Terminal connectorTerminal connector pinout table Terminal connector schematic diagramPower connector block Power connectionsSchematic diagram Power terminal block and Power connectors RS-232 connector Checking the firmware TroubleshootingBasic Configuration Upgrading the firmwareEmergency recovery procedure Axis supportSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Replacing the lens Removing and attaching the lensTechnical Specifications LensUsers System integration General performance considerations Optimizing your systemFrame rates Motion Jpeg and MPEG-4 BandwidthAxis 223M Technical Specifications Axis 223M Technical Specifications Glossary of Terms Axis 223M Glossary of Terms Index Axis 223M IndexRtsp