Axis Communications AXIS 223M user manual Frame rates Motion Jpeg and MPEG-4, Bandwidth

Page 64

64AXIS 223M - Technical Specifications

Frame rates - Motion JPEG and MPEG-4

Typical frame rates in frames/second (fps) for Motion JPEG and MPEG-4 video streams from the AXIS 223M, specified with the parameter settings listed below. Note that these values are guidelines only - actual values may vary.

•Normal 4:3 - 9 fps

•Widescreen 16:9 - 12 fps

Motion JPEG settings:

•Viewing in AMC

•Compression level = 30%

MPEG-4 settings:

•Viewing in AMC

•Compression level = 30%

•Video Object Type = Advanced Simple

•GOV length = 8

•GOV structure = IP*

*Note that setting the GOV structure to use “I-frames only” will increase the frame rate at the expense of the bit rate.

Important!

•The figures displayed here are the values as delivered by the camera. If other restrictions are currently in force, (e.g. bandwidth limitation) these values might not correspond to those actu- ally received by the client.

•For Motion JPEG, these values will only be accurate as long as no frame rate limit has been specified.

Bandwidth

As there are many factors that affect bandwidth, it is very difficult to predict the required amounts. The settings that affect bandwidth are:

•image resolution

•image compression

•frame rate

•MPEG-4 object type

•MPEG-4 GOV structure

•maximum exposure time

•audio

Image 64

Contents Axis 223M Network Camera User’s Manual About this Document Contents Axis 223M Product Features Product Overview LED Accessing the Camera Access from a browserAccessing the camera from the Internet Setting the root passwordSetting the focus Live View LayoutAMC Audio controls Video stream types Video StreamsMotion Jpeg How to stream MPEG-4 MPEG-4 protocols and communication methodsAxis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Setup link Accessing the Setup link from a browserImage settings Video and Image SettingsImage Overlay/Mask Overlay/Mask typeUpload and use an overlay/mask AdvancedOverlay image requirements Camera Settings MPEG-4 Settings Mjpeg Settings Enable Audio Audio SettingsAudio Audio Channels Audio InputAudio Output Custom Settings dialog Live View ConfigLayout Default Video Format Default ViewerViewer settings Action ButtonsHtml Examples External VideoUser Defined Links Check Show custom LinkSequence Mode Event Servers Event ConfigurationEvent Types How to set up a triggered event Triggered eventPre-trigger and Post-trigger buffers Scheduled EventCamera Tampering SettingsMotion Detection Object size, history and sensitivity Port Status ExamplesSecurity System OptionsUsers IP Address Filtering HttpsIeee Authentication process CA serversDate & Time Basic TCP/IP SettingsNetwork Advanced TCP/IP Settings Axis 223M System Options ServicesNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT Traversal port mapping for IPv4FTP Network TrafficQoS QoS Quality of ServiceSmtp email Ports & Devices UPnPBonjour PortsMaintenance SupportSystem Overview Logs & ReportsAxis 223M System Options Information Using the Control Button Resetting to the factory default settingsAbout Unit Connectors Terminal connectorTerminal connector pinout table Terminal connector schematic diagramPower connector block Power connectionsSchematic diagram Power terminal block and Power connectors RS-232 connector Troubleshooting Basic ConfigurationChecking the firmware Upgrading the firmwareEmergency recovery procedure Axis supportSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Replacing the lens Removing and attaching the lensTechnical Specifications LensUsers System integration General performance considerations Optimizing your systemFrame rates Motion Jpeg and MPEG-4 BandwidthAxis 223M Technical Specifications Axis 223M Technical Specifications Glossary of Terms Axis 223M Glossary of Terms Index Axis 223M IndexRtsp