Axis Communications AXIS 223M user manual Maintenance, Support, System Overview, Logs & Reports

Page 47

AXIS 223M - System Options 47

LED

The Status and Network Indicator LEDs can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 7, or the online help .

Note: The LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

•Restart - The unit restarts without changing any setting. Use this method if the unit is not behaving as expected.

•Restore - The unit restarts and most current settings are reset to the factory default values. The only settings saved are:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•Default - The Default button should be used with caution. Pressing this button will return all of the camera's settings, including the IP address, to the factory default values. The camera will then have to be re-installed.

Upgrade Server - See Upgrading the firmware, on page 54.

Backup - To take a backup of all of the parameters, and any user-defined scripts, click the Backup button. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior.

Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.

Support

The Support Overview page provides valuable information on troubleshooting and contact information, should you require technical assistance.

System Overview

The System Overview page provides an overview of the current network, security, event and camera settings.

Logs & Reports

When contacting Axis support, please be sure to provide a valid Server Report with your query. The Access Log is automatically included in the server report.

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Axis 223M Network Camera User’s Manual About this Document Contents Axis 223M Product Features Product Overview LED Access from a browser Accessing the CameraSetting the focus Setting the root passwordAccessing the camera from the Internet Layout Live ViewAMC Audio controls Motion Jpeg Video StreamsVideo stream types MPEG-4 protocols and communication methods How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control Other MPEG-4 clients Accessing the Setup link from a browser Setup linkImage Video and Image SettingsImage settings Overlay/Mask type Overlay/MaskOverlay image requirements AdvancedUpload and use an overlay/mask Camera Settings MPEG-4 Settings Mjpeg Settings Audio Audio SettingsEnable Audio Audio Input Audio ChannelsAudio Output Layout Live View ConfigCustom Settings dialog Default Viewer Default Video FormatAction Buttons Viewer settingsCheck Show custom Link Html ExamplesExternal Video User Defined LinksSequence Mode Event Types Event ConfigurationEvent Servers Triggered event How to set up a triggered eventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection SettingsCamera Tampering Object size, history and sensitivity Examples Port StatusUsers System OptionsSecurity Https IP Address FilteringIeee CA servers Authentication processNetwork Basic TCP/IP SettingsDate & Time Axis 223M System Options Services Advanced TCP/IP SettingsNAT Traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 Address Network Traffic FTPSmtp email QoS Quality of ServiceQoS Ports Ports & DevicesUPnP BonjourLogs & Reports MaintenanceSupport System OverviewAxis 223M System Options Information About Resetting to the factory default settingsUsing the Control Button Terminal connector Unit ConnectorsTerminal connector schematic diagram Terminal connector pinout tableSchematic diagram Power terminal block and Power connectors Power connectionsPower connector block RS-232 connector Upgrading the firmware TroubleshootingBasic Configuration Checking the firmwareAxis support Emergency recovery procedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Removing and attaching the lens Replacing the lensLens Technical SpecificationsUsers System integration Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Axis 223M Technical Specifications Axis 223M Technical Specifications Glossary of Terms Axis 223M Glossary of Terms Axis 223M Index IndexRtsp
Top Page Image Contents