Axis Communications AXIS 223M user manual Date & Time, Network, Basic TCP/IP Settings

Page 41

AXIS 223M - System Options 41

Date & Time

Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h clock format in the Overlay Images (see below).

New Server Time - Select your time zone from the drop-down list. If you want the AXIS 223M clock to automatically adjust for daylight savings time, select the Automatically adjust for daylight saving time changes.

From the Time Mode section, select the preferred method to use for setting the time:

Synchronize with computer time - sets the time from the clock on your computer.

Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes. Specify the NTP server's IP address or host name.

Set manually - this option allows you to manually set the time and date.

Note: Note that if using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.

See Network > TCP/IP below.

Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the Live View video streams.

Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats in the online help for information on how to create your own file formats.

Network

Basic TCP/IP Settings

IP Address Configuration - The AXIS 223M supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled.

When using IPv4, the IP address can be set automatically via DHCP, or a static IP address can be set manually.

If IPv6 is enabled, your camera receives an IP address according to the configuration in the network router.

There are also options for setting up notification of changes in the IP address, and for using the AXIS Internet Dynamic DNS Service. For more information on setting the IP

address, please see the online help .

Notes:

To receive notification whenever the camera’s IP address changes (via e.g. DHCP),

 

configure the options for notification of IP address change. See Services below.

 

If your DHCP server can update a DNS server, you can access the AXIS 223M by a host

 

name which is always the same, regardless of the IP address.

Image 41
Contents Axis 223M Network Camera User’s Manual About this Document Contents Axis 223M Product Features Product Overview LED Access from a browser Accessing the CameraSetting the focus Setting the root passwordAccessing the camera from the Internet Layout Live ViewAMC Audio controls Motion Jpeg Video StreamsVideo stream types MPEG-4 protocols and communication methods How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control Other MPEG-4 clients Accessing the Setup link from a browser Setup linkImage Video and Image SettingsImage settings Overlay/Mask type Overlay/MaskOverlay image requirements AdvancedUpload and use an overlay/mask Camera Settings MPEG-4 Settings Mjpeg Settings Audio Audio SettingsEnable Audio Audio Input Audio ChannelsAudio Output Layout Live View ConfigCustom Settings dialog Default Viewer Default Video FormatAction Buttons Viewer settingsExternal Video Html ExamplesUser Defined Links Check Show custom LinkSequence Mode Event Types Event ConfigurationEvent Servers Triggered event How to set up a triggered eventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection SettingsCamera Tampering Object size, history and sensitivity Examples Port StatusUsers System OptionsSecurity Https IP Address FilteringIeee CA servers Authentication processNetwork Basic TCP/IP SettingsDate & Time Axis 223M System Options Services Advanced TCP/IP SettingsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT Traversal port mapping for IPv4Network Traffic FTPSmtp email QoS Quality of ServiceQoS UPnP Ports & DevicesBonjour PortsSupport MaintenanceSystem Overview Logs & ReportsAxis 223M System Options Information About Resetting to the factory default settingsUsing the Control Button Terminal connector Unit ConnectorsTerminal connector schematic diagram Terminal connector pinout tableSchematic diagram Power terminal block and Power connectors Power connectionsPower connector block RS-232 connector Basic Configuration TroubleshootingChecking the firmware Upgrading the firmwareAxis support Emergency recovery procedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Removing and attaching the lens Replacing the lensLens Technical SpecificationsUsers System integration Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Axis 223M Technical Specifications Axis 223M Technical Specifications Glossary of Terms Axis 223M Glossary of Terms Axis 223M Index IndexRtsp