Axis Communications AXIS 223M user manual Object size, history and sensitivity

AXIS 223M - Event Configuration 35

Once configured, the motion detection windows appear in the list of available triggers, for triggering events. See How to set up a triggered event above.

Note: Using the motion detection feature may decrease the camera’s overall performance.

Configuring Motion Detection

1.Click Motion Detection in the Event Configuration menu.

2.Click the Configure Included Windows radio button and click New.

3.Enter a descriptive name under Window name.

4.Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and drag to the desired position).

5.Adjust the Object size, History and Sensitivity profile sliders (see table below for details). Any detected motion within an active window is then indicated by red peaks in the Activity window (the active window has a red frame).

6.Click Save.

To exclude parts of the Include window, click the Configure Excluded Windows button and position the Exclude window as required, within the Include window.

Object size, history and sensitivity:

	Object Size	History	Sensitivity
High level	Only very large objects	An object that appears in the region will	Ordinary colored objects on ordinary back-
	trigger motion detection	trigger the motion detection for a long	grounds will trigger the motion detection
		period
Low level	Even very small objects	An object that appears in the region will	Only very bright objects on a dark back-
	trigger motion detection	trigger motion detection for only a very	ground will trigger motion detection
		short period