Axis Communications AXIS 211M manual Adjust the image and focus

Page 10

Page 10

AXIS 211M Installation Guide

Adjust the image and focus

To focus the AXIS 211M follow the instructions below.

1.From the Basic Configuration page in the setup tools, open the Focus adjustment page.

2.Set the DC-Iris to Disabled and click Save.

3.Unscrew the zoom puller on the lens by turning it anti-clockwise. Adjust the zoom setting as required. Re- tighten the zoom puller.

Zoom puller (Tele/wide)

4. Unscrew the focus puller on the lens.

Focus puller

Adjust the focus as required. Re-

 

tighten the focus puller.

 

5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.

Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set with this method it will then be maintained in any light conditions.

Accessing the AXIS 211M from the Internet

Once installed, your AXIS 211M is accessible on your local network (LAN). To access the camera from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. Please refer to the documentation for your router for further instructions. For more information on this and other topics, visit the Axis Support Web at www.axis.com/techsup

Image 10
Contents Axis 211M Page Installation steps Package contentsRear panel DimensionsHardware overview UndersideInstall the hardware Connect the cablesAssign an IP address Method Recommended forAutomatic discovery Axis IP Utility single camera/small installationAssign the IP address manually Assign an IP address in a single device Axis Camera Management multiple cameras/large installationsAssign IP addresses in multiple devices Set the password Adjust the image and focus Accessing the Axis 211M from the InternetOther methods of setting the IP address Set the IP address with ARP/PingSpecifications Unit connectorsFunction LED indicators Connection diagramColor Indication Resetting to the Factory Default Settings Further informationContenu de lemballage Étapes de linstallationArticle Modèles/variantes/remarques Face arrière Présentation du matérielVue de dessous Installation du matériel Branchement des câblesMéthode Recommandée pour Système Dexploitation Attribution dune adresse IPDétection automatique Axis IP Utility Une seule caméra/petite installationAffectez manuellement ladresse IP Attribuer une adresse IP à un seul dispositif Attribuer des adresses IP à plusieurs dispositifsDéfinition du mot de passe Réglez limage et la mise au point Accès à lappareil Axis 211M à partir dInternetAutres méthodes de définition de ladresse IP Définition de ladresse IP à laide dARP/PingConnecteurs de lunité Fonction Numéro de Remarques Spécifications BrocheTémoins DEL Diagramme de connexionTémoin Couleur Indication Rétablissement des paramètres dusine par défaut Plus dinformationsLieferumfang InstallationsschritteKomponente Modelle/Varianten/Anmerkungen Unterseite HardwareübersichtAbmessungen Hardware installieren Kabel anschließenIP-Adresse zuweisen Methode Empfohlen für BetriebssystemAutomatische Erkennung Axis IP Utility Einzelne Kamera/kleine InstallationIP-Adresse manuell zuweisen IP-Adressen mehreren Geräten zuweisen Axis Camera Management Mehrere Kameras/große InstallationEine IP-Adresse einem einzelnen Gerät zuweisen Kennwort festlegen Bildschärfe einstellen Internetzugriff auf die Axis 211MWeitere Methoden zum Festlegen der IP-Adresse IP-Adresse per ARP/Ping festlegenKameraanschlüsse Funktion Pinnummer Hinweise Technische DatenLED-Anzeigen AnschlussschaltbildFarbe Bedeutung Auf werkseitige Voreinstellungen zurücksetzen Weitere InformationenContenuto della confezione Procedura di installazioneArticolo Modello/varianti/note Panoramica dell’hardware DimensioniPannello posteriore Etichetta lato inferiore Installazione lhardware Collegamento dei caviImpostazione di un indirizzo IP Metodo Consigliato per…Rilevamento automatico Axis IP Utility videocamera singola/piccole installazioniImpostazione automatica dellindirizzo IP Assegnazione di un indirizzo IP in una singola videocamera Axis Camera Management più videocamere/grandi installazioniAssegnazione degli indirizzi IP in più videocamere Impostazione della password Accesso a Axis 211M da Internet Regolazione della messa a fuocoSistema operativo UPnP Altri metodi di impostazione dell’indirizzo IPImpostazione dellindirizzo IP con ARP/Ping Pagine diConnettori Funzione Numero pin SpecificheIndicatori LED Schema delle connessioniColore Indicazione Ripristino delle impostazioni di fabbrica Ulteriori informazioniContenido del paquete Pasos para la instalaciónArtículo Modelos/variantes/notas Panel posterior DimensionesPresentación del hardware Parte inferiorInstalación del hardware Conexión de los cablesConfiguración de una dirección IP Método Recomendado paraDetección automática Asignación manual de la dirección IP opcionalAsignación de una dirección IP en un dispositivo individual Asignación de direcciones IP en varios dispositivosConfiguración de la contraseña Ajuste del enfoque Acceso a la Axis 211M desde InternetOtros métodos para configurar la dirección IP Configuración de la dirección IP con ARP/PingConectores Función Número de pin Notas EspecificacionesIndicadores LED Diagrama de conexionesColor Indicación Restablecimiento de los valores iniciales Más informaciónPage Axis 211M Installation Guide
Related manuals
Manual 2 pages 59.38 Kb