AXIS 211M Installation Guide | Page 7 |
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the AXIS 211M.
Automatic discovery
1.Check that the AXIS 211M is connected to the network and that power has been applied.
2.Start AXIS IP Utility.
3.When the camera appears in the window,
4.See page 9 for instructions on how to assign the password.
Assign the IP address manually
1.Acquire an unused IP address on the same network segment as your computer.
2.Click the button 
Assign new IP address using serial number and enter the serial number and IP address for the AXIS 211M. The serial number is located on the product label.
3.Click the Assign button and follow the instructions.
4.Click the Home Page button to access the camera’s web pages.
5.See page 9 for instructions on how to set the password.
ENGLISH