Axis Communications AXIS 211M Resetting to the Factory Default Settings, Further information

Page 14 AXIS 211M Installation Guide

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default settings:

1.Disconnect power from the camera.

2.Press and hold the Control button for 15 seconds and reconnect power.

3.Keep the button pressed until the Status Indicator displays amber (this may take up to 15 seconds), then release button.

4.When the status indicator displays green (which can take up to 1 minute) the camera is reset to the factory default settings.

5.Re-assign the IP address, using one of the methods described in this document.

It is also possible to reset parameters to the original factory default settings via the web interface. For more information, please see the online help or the user’s manual.

Further information

The user’s manual is available from the Axis Web site at www.axis.com or from the Axis Network Video Product CD supplied with this product.

Tip!

Visit www.axis.com/techsup to check if there is updated firmware available for your AXIS 211M. To see the currently installed firmware version, see the Basic Configuration web page in the product’s Setup tools.