Samsung SNB-3000(P) user manual Overview

Page 4

overview

CAUTION

1.Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity. Doing so may cause fire or electric shock.

3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

4.Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fire or damage to the product.

5.Keep out of direct sunlight and heat radiation sources. It may cause fire.

6.Install it in a place with good ventilation.

7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

8.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.

10.When using the camera outdoors, moisture may occur inside the camera due to temperature difference between indoors and outdoors. For this reason, it is recommended to install the camera indoors. For outdoor use, use the camera with built-in fan and heater.

_ overview

Image 4

Contents Network Camera Overview English Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix Precautions Installation and Use Product Features CPU Pentium4 / 2.4GHz or higher Compatible Poe Switches What’s IncludedCompatible Ip Routers Lens OptionsAt a Glance Front SideRear Side PowerSystem GND Disconnect the power before proceeding Mounting the lensMounting the CS lens Mounting the C lensConnecting the Auto Iris Lens connector FocusingInserting/Removing an SD Memory Card Inserting an SD Memory CardWhat is a memory card? Slot when releasedMemory Card Information not included Removing an SD Memory CardContacts Lock Switch Memory Card UseMemory Card Components SdhcConnecting with Other Device Connecting to the monitorPower Supply Network ConnectionConnecting to Audio Input/Output MicrophoneLINE-IN LINE-OUT Speaker Pre-AmpAudio I/O Block Diagram NetworkAlarm I/O Wiring Diagram Connecting to the I/O port box3 4 How to use the menu key You can configure the camera settings using the Web ViewerFactory Defaults  System Info  Profile Camera SET  Privacy ZoneCamera ID Camera SetupIris Motion DNRShutter SENS-UPDAY/NIGHT White BAL DAYNIGHT / NIGHTDAY If set to Any excessively bright area in a night scene will be maskedDigital Zoom DetailAGC Color SUP ReverseZone Setup SettingSelect Point You will see dots on the screenFactory Default OthersOSD Color You can set the font color of the user interfaceSignal LanguageYou can check the system information You can select a language to your preferenceNetwork connection and setup Download and upgrade with the latest S/W version availableNetwork connection and setup Select Status from the Settings menu of the IP RouterSetting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANButtons used in IP Installer IP Address SetupURL Static IP Setup Manual Network SetupAuto Set Support this functionWill be adjusted according to the Http port value Auto Network Setup Http//192.168.1.20110000Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingConnecting to the camera from a shared local Connecting to the camera from a remote PC via the InternetAddress bar of the Internet browser Ex http//mfffe42.websamsung.netConnecting to the camera Using URLConnecting via URL If the Http port is other than Normally, you wouldAdministrator ID, admin, is fixed and can not be changed LoginTo check the Ddns address Installing ActiveX For Windows XP Service Pack 2 usersPopup setting as follows Current siteAUsing the Live Screen Backup To capture the snapshotTo record a video To print out the screenshotClick on the scene to record Web viewer Using ThE Sd SEARCh Viewer Screen Sd Search Viewer Screen layoutAccessing the Setup screen Default SetupTo configure the video & audio settings  Contrast Adjust the contrast fromTo configure the IP settings Differently with each other Click Basic User User setup window appears To set the user accountTo set the display language When done, click Apply Selected language will be appliedClick Basic Language To set the date/time PC time configuration settingsTo time To check the log information To update the softwareSelect system log Log information list appears To reset the system To set the HttpsOverlay Setup To Set IP FilteringTo set the text Form of https//CameraIPEvent Setup To set the event transfer functionProvider To test the FTP transfer Click TestSetup screen To setup the record To set an alarm imageTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the video transfer mode Network SetupTo set the Ddns DAY Mode ALCLens Level Backlight Night BurstCavlc Terminology Bitrate Control CBRConstant Bitrate English Specifications CS/C RAMDSP 4CIFSetup HTTPS, SSL, DhcpARP, DNS, DDNS, Vsip DdnsHttp API NtscSDK  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1 Frame Rate NtscMPEG4 4CIF EstimationHPel264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution  Verify the settings in the following sequence NTP must be properly configuredAlarm Video Transmission must be enabled Analysis settingGNU General Public License Preamble GPL S/W  Lgpl S/WProgram, and can be reasonably Page Page No Warranty GNU General Public License Terms and Conditions You must show them these terms so they know their rightsBasic Permissions Source CodeProtecting Users Legal Rights From Anti-Circumvention Law Conveying Verbatim Copies Conveying Non-Source FormsPage Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents Use with the GNU Affero General Public License Disclaimer of Warranty GNU Lesser General Public LicenseLimitation of Liability END of Terms and ConditionsPreamble Page AThe modified work must itself be a software library Page Page Page No Warranty OpenSSL License No Event Shall the OpenSSLOriginal SSLeay License