Samsung SNB-3000(P) user manual Network Setup, To set the video transfer mode, To set the Ddns

setup screen

Network Setup

To set the video transfer mode

You can control the transfer rate according to the video transfer mode and network speed.

1.Select <Network> - <Streaming type>. The Video Transfer setup window appears.

2.When done, click [Apply]. Your settings will be saved.

VNP streaming : You can set the

Samsung Protocol (VNP) for the streaming service.

-Protocol : Select a video transfer protocol from TCP*, UDP (Unicast)*, and UDP (Multicast)*.

Speaking to the camera unit through microphone is not supported.

Multicast backbone (MBone) is not supported; you can access the camera only in the multicast local network environment.

RTP streaming : You can set the RTP Protocol or the streaming service.

-Protocol : Select a video transfer protocol from UDP (Unicast) and UDP (Multicast).

To set the DDNS

DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it and enables connecting a camera with a fixed Host Name even if the IP address of the camera may be dynamically changed.

1.Select <Network> - <DDNS>. The DDNS setup window appears.

2.When done, click [Apply]. Your settings will be saved.

M  For checking the DDNS address, refer to "To check the DDNS address". (page 43)

66_ setup screen