Samsung SNB-3000(P)  Verify the settings in the following sequence, Analysis setting, Generated

Page 87

PROBLEM		SOLUTION
No JPEG file is transferred via FTP/	 Verify the settings in the following sequence:
SMTP on occurrence of intelligent		A. NTP must be properly configured.
video analysis event of camera		B. The <Intelligent Video Analysis> should be set to <Enable>.
even when the <Intelligent Video		C. Alarm Video Transmission must be enabled.
Analysis> is set to <Enable>.		D. Check for scheduling conflict.
Can <Set Rules> be configured	 Yes, it can be. You can set rules for events despite of the intelligent video
even when the <Intelligent Video		analysis setting.
Analysis> is set to <Disable>?		analysis setting.
No signal is found at the Alarm
Output port even when an		Check alarm output port settings.
intelligent video analysis event is		Check alarm output port settings.
generated.
Cannot record into the SD memory	 Check if the memory card is defective.
card.	 Check if the write protection tab of the memory card is set to “Lock”.
SD memory indicator does not	 Check if the memory card is defective.
turn on even when the SD memory		Check if the <SD Card Record> is checked in <Setup> - <Event> -
card is inserted.		<Alarm image> menu.
SD memory card is inserted but		Check if the memory card is inserted in the proper direction. Operation
SD memory card is inserted but		of memory card that is formatted by other devices is not guaranteed
the camera does not operate		with this camera unit
properly.		Format the memory card again in <Setup> - <Event> - <Record
		setup> menu.
Cannot format the SD memory	 Check if the write protection tab of the memory card is set to "Lock".
card.

ixdn ● Appe

English _87

Image 87

Contents Network Camera Overview English Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix Product Features Precautions Installation and Use CPU Pentium4 / 2.4GHz or higher Lens Options Compatible Poe SwitchesWhat’s Included Compatible Ip RoutersFront Side At a GlancePower Rear SideSystem GND Mounting the C lens Disconnect the power before proceedingMounting the lens Mounting the CS lensInserting an SD Memory Card Connecting the Auto Iris Lens connectorFocusing Inserting/Removing an SD Memory CardRemoving an SD Memory Card What is a memory card?Slot when released Memory Card Information not includedSdhc Contacts Lock SwitchMemory Card Use Memory Card ComponentsNetwork Connection Connecting with Other DeviceConnecting to the monitor Power SupplySpeaker Pre-Amp Connecting to Audio Input/OutputMicrophone LINE-IN LINE-OUTNetwork Audio I/O Block DiagramConnecting to the I/O port box Alarm I/O Wiring Diagram3 4 You can configure the camera settings using the Web Viewer How to use the menu key Privacy Zone Factory Defaults  System Info Profile  Camera SETCamera Setup Camera IDIris SENS-UP MotionDNR ShutterAny excessively bright area in a night scene will be masked DAY/NIGHTWhite BAL  DAYNIGHT / NIGHTDAY If set toReverse Digital ZoomDetail AGC Color SUPYou will see dots on the screen Zone SetupSetting Select PointYou can set the font color of the user interface Factory DefaultOthers OSD ColorYou can select a language to your preference SignalLanguage You can check the system informationDownload and upgrade with the latest S/W version available Network connection and setupSelect Status from the Settings menu of the IP Router Network connection and setupSetting the IP Router Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingIP Address Setup Buttons used in IP InstallerURL Support this function Static IP SetupManual Network Setup Auto SetWill be adjusted according to the Http port value Http//192.168.1.20110000 Auto Network SetupDynamic IP Environment Setup Dynamic IP SetupManual Port Range Forwarding Port Range Forward Port Mapping SetupEx http//mfffe42.websamsung.net Connecting to the camera from a shared localConnecting to the camera from a remote PC via the Internet Address bar of the Internet browserNormally, you would Connecting to the cameraUsing URL Connecting via URL If the Http port is other thanLogin Administrator ID, admin, is fixed and can not be changedTo check the Ddns address Current siteA Installing ActiveXFor Windows XP Service Pack 2 users Popup setting as followsUsing the Live Screen To capture the snapshot BackupTo print out the screenshot To record a videoClick on the scene to record Web viewer Sd Search Viewer Screen layout Using ThE Sd SEARCh Viewer Screen Contrast Adjust the contrast from Accessing the Setup screenDefault Setup To configure the video & audio settingsTo configure the IP settings Differently with each other To set the user account Click Basic User User setup window appearsWhen done, click Apply Selected language will be applied To set the display languageClick Basic Language PC time configuration settings To set the date/timeTo time To update the software To check the log informationSelect system log Log information list appears To set the Https To reset the systemForm of https//CameraIP Overlay SetupTo Set IP Filtering To set the textTo test the FTP transfer Click Test Event SetupTo set the event transfer function ProviderSetup screen To set an alarm image To setup the recordTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer Network Setup To set the video transfer modeTo set the Ddns Night Burst DAY ModeALC Lens Level BacklightTerminology Cavlc Bitrate Control CBRConstant Bitrate English Specifications 4CIF CS/CRAM DSPDdns SetupHTTPS, SSL, Dhcp ARP, DNS, DDNS, VsipNtsc Http APISDK EstimationHPel  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1Frame Rate Ntsc MPEG4 4CIF264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution Analysis setting  Verify the settings in the following sequenceNTP must be properly configured Alarm Video Transmission must be enabled Lgpl S/W GNU General Public LicensePreamble  GPL S/WProgram, and can be reasonably Page Page No Warranty GNU General Public License You must show them these terms so they know their rights Terms and ConditionsSource Code Basic PermissionsProtecting Users Legal Rights From Anti-Circumvention Law Conveying Non-Source Forms Conveying Verbatim CopiesPage Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsPatents Use with the GNU Affero General Public License END of Terms and Conditions Disclaimer of WarrantyGNU Lesser General Public License Limitation of LiabilityPreamble Page AThe modified work must itself be a software library Page Page Page No Warranty No Event Shall the OpenSSL OpenSSL LicenseOriginal SSLeay License