Samsung SNB-3000(P) user manual To set the scheduled transfer

Page 65

Activation time : Sets the operation time of the intelligent video analysis.

-Always : Configured action is performed whenever an intelligent video analysis event occurs.

-Only scheduled time : Configured action is performed when intelligent video analysis event occurs during the specified time period.

Action : You can configure the action for an intelligent video analysis event.

-Alarm output : Sets the alarm output port for the signaling the intelligent video analysis event.

-Output duration : Sets the alarm signal dwell time to the Alarm Output port on an intelligent video analysis event.

When another intelligent video analysis event follows the previous one, the output duration time is reset based on the most recent event.

-Alarm image transfer : If selected <Enable>, depending on your setting of <Event> - <Transfer setup>, the image in JPEG format will be sent to the registered address via FTP or e-mail (SMTP), or saved in the SD memory card.

To set the scheduled transfer

You can set to transfer the JPEG image to the FTP/SMTP server saved in the SD memory card at a specific interval.

1.Select <Event> - <Schedule>.

The Schedule Transfer setup window appears.

Schedule transfer function :

If selecting <Enable>, the schedule transfer function will be activated; if selecting <Disable>, it will be deactivated.

Transfer interval : You can set the time interval to transfer images.

You can set the unit of the interval to <seconds> or <minutes>; you can also set to transfer one image per 5/15/30/45/60 seconds, or one per 5/15/30/45/60 minutes.

Activation time : You can set a time to execute a specific command when a sched- ule transfer event occurs.

-Always : Always sends an image at the set interval.

-Only scheduled time : Periodically transfers image only during the specified time period.

2.When done, click [Apply]. Your settings will be saved.

n ee cr p S●tuSe

English _65

Image 65

Contents Network Camera Overview English Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix  CPU Pentium4 / 2.4GHz or higher Product FeaturesPrecautions Installation and Use What’s Included Compatible Poe SwitchesCompatible Ip Routers Lens OptionsFront Side At a GlanceSystem PowerRear Side GND Mounting the lens Disconnect the power before proceedingMounting the CS lens Mounting the C lensFocusing Connecting the Auto Iris Lens connectorInserting/Removing an SD Memory Card Inserting an SD Memory CardSlot when released What is a memory card?Memory Card Information not included Removing an SD Memory CardMemory Card Use Contacts Lock SwitchMemory Card Components SdhcConnecting to the monitor Connecting with Other DevicePower Supply Network ConnectionMicrophone Connecting to Audio Input/OutputLINE-IN LINE-OUT Speaker Pre-AmpNetwork Audio I/O Block Diagram3 4 Connecting to the I/O port boxAlarm I/O Wiring Diagram You can configure the camera settings using the Web Viewer How to use the menu key Profile Factory Defaults  System Info Camera SET  Privacy ZoneIris Camera SetupCamera ID DNR MotionShutter SENS-UPWhite BAL DAY/NIGHT DAYNIGHT / NIGHTDAY If set to Any excessively bright area in a night scene will be maskedDetail Digital ZoomAGC Color SUP ReverseSetting Zone SetupSelect Point You will see dots on the screenOthers Factory DefaultOSD Color You can set the font color of the user interfaceLanguage SignalYou can check the system information You can select a language to your preferenceDownload and upgrade with the latest S/W version available Network connection and setupSelect Status from the Settings menu of the IP Router Network connection and setupSetting the IP Router Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingURL IP Address SetupButtons used in IP Installer Manual Network Setup Static IP SetupAuto Set Support this functionWill be adjusted according to the Http port value Http//192.168.1.20110000 Auto Network SetupDynamic IP Environment Setup Dynamic IP SetupManual Port Range Forwarding Port Range Forward Port Mapping SetupConnecting to the camera from a remote PC via the Internet Connecting to the camera from a shared localAddress bar of the Internet browser Ex http//mfffe42.websamsung.netUsing URL Connecting to the cameraConnecting via URL If the Http port is other than Normally, you wouldTo check the Ddns address LoginAdministrator ID, admin, is fixed and can not be changed For Windows XP Service Pack 2 users Installing ActiveXPopup setting as follows Current siteAUsing the Live Screen To capture the snapshot BackupClick on the scene to record To print out the screenshotTo record a video Web viewer Sd Search Viewer Screen layout Using ThE Sd SEARCh Viewer ScreenDefault Setup Accessing the Setup screenTo configure the video & audio settings  Contrast Adjust the contrast fromTo configure the IP settings Differently with each other To set the user account Click Basic User User setup window appearsClick Basic Language When done, click Apply Selected language will be appliedTo set the display language To time PC time configuration settingsTo set the date/time Select system log Log information list appears To update the softwareTo check the log information To set the Https To reset the systemTo Set IP Filtering Overlay SetupTo set the text Form of https//CameraIPTo set the event transfer function Event SetupProvider To test the FTP transfer Click TestSetup screen To set an alarm image To setup the recordTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the Ddns Network SetupTo set the video transfer mode ALC DAY ModeLens Level Backlight Night Burst Bitrate Control CBRConstant Bitrate TerminologyCavlc English Specifications RAM CS/CDSP 4CIFHTTPS, SSL, Dhcp SetupARP, DNS, DDNS, Vsip DdnsSDK NtscHttp API Frame Rate Ntsc  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1MPEG4 4CIF EstimationHPel264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution NTP must be properly configured  Verify the settings in the following sequenceAlarm Video Transmission must be enabled Analysis settingPreamble GNU General Public License GPL S/W  Lgpl S/WProgram, and can be reasonably Page Page No Warranty GNU General Public License You must show them these terms so they know their rights Terms and ConditionsProtecting Users Legal Rights From Anti-Circumvention Law Source CodeBasic Permissions Conveying Non-Source Forms Conveying Verbatim CopiesPage Additional Terms Patents Acceptance Not Required for Having CopiesAutomatic Licensing of Downstream Recipients Use with the GNU Affero General Public License GNU Lesser General Public License Disclaimer of WarrantyLimitation of Liability END of Terms and ConditionsPreamble Page AThe modified work must itself be a software library Page Page Page No Warranty No Event Shall the OpenSSL OpenSSL LicenseOriginal SSLeay License