Samsung SNB-3000(P) user manual To setup the record, To set an alarm image

Page 61

To setup the record

1.Click <Event> - <Record setup>. The Record setup window appears.

2.To complete the setting, click the [Apply] button.

The settings are saved.

SD card : Enables you to verify data saved on the SD memory card and format the memory card itself. It

is possible to set to automatically delete movie clips recorded before a certain period of time (e.g. 1 week, 1 month, or 1 year).

Options : Determine whether or not you wish to receive Email notification of insufficient capacity warnings.

To set an alarm image

You can configure to send message via FTP/E-mail (SMTP) or to save recording into the SD memory card.

Select a transfer method when an event occurs or the schedule transfer function is activated.

1.Select <Event> - <Alarm image>. The Alarm Image setup window appears.

Transfer mode : You can select alarm message notification method among FTP/E-mail transfer and SD Card recording.

-FTP transfer : The image is sent to the specified FTP address.

-E-mail transfer : The image is sent to the specified email address.

-SD Card Record : Saves images into the SD memory card.

M If an SD memory card is not inserted, the corresponding button will be disabled.

In this case, insert the SD memory card into the slot and refresh to enable the button.

J If the SD memory card is ejected while the button is checked, the camera automatically restarts.

Transferred image naming setup : You can set the file name of an alarm image to be sent when an alarm is triggered or during the scheduled transfer.

Pre/post alarm image : You can set to save the pre or post alarm image.

-Number of image : The frame rate per second can be one among 1, 2, 3, and 5.

-Pre-alarm duration : The pre alarm duration can be one among 5 seconds, 10 seconds, 15 seconds, and 30 seconds. You can send a pre-alarm image of up to 30 seconds before the alarm is triggered.

(The max time differs, depending on the frame rate)

n ee cr p StuSe

English _61

Image 61
Contents Network Camera Overview English  Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix Precautions Installation and Use Product Features CPU Pentium4 / 2.4GHz or higher What’s Included Compatible Poe SwitchesCompatible Ip Routers Lens OptionsFront Side At a GlanceRear Side PowerSystem GND Mounting the lens Disconnect the power before proceedingMounting the CS lens Mounting the C lensFocusing Connecting the Auto Iris Lens connectorInserting/Removing an SD Memory Card Inserting an SD Memory CardSlot when released What is a memory card?Memory Card Information not included Removing an SD Memory CardMemory Card Use Contacts Lock SwitchMemory Card Components SdhcConnecting to the monitor Connecting with Other DevicePower Supply Network ConnectionMicrophone Connecting to Audio Input/OutputLINE-IN LINE-OUT Speaker Pre-AmpNetwork Audio I/O Block DiagramAlarm I/O Wiring Diagram Connecting to the I/O port box3 4 You can configure the camera settings using the Web Viewer How to use the menu key Profile Factory Defaults  System Info Camera SET  Privacy ZoneCamera ID Camera SetupIris DNR MotionShutter SENS-UPWhite BAL DAY/NIGHT DAYNIGHT / NIGHTDAY If set to Any excessively bright area in a night scene will be maskedDetail Digital ZoomAGC Color SUP ReverseSetting Zone SetupSelect Point You will see dots on the screenOthers Factory DefaultOSD Color You can set the font color of the user interfaceLanguage SignalYou can check the system information You can select a language to your preferenceDownload and upgrade with the latest S/W version available Network connection and setupSelect Status from the Settings menu of the IP Router Network connection and setupSetting the IP Router Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingButtons used in IP Installer IP Address SetupURL Manual Network Setup Static IP SetupAuto Set Support this functionWill be adjusted according to the Http port value Http//192.168.1.20110000 Auto Network SetupDynamic IP Environment Setup Dynamic IP SetupManual Port Range Forwarding Port Range Forward Port Mapping SetupConnecting to the camera from a remote PC via the Internet Connecting to the camera from a shared localAddress bar of the Internet browser Ex http//mfffe42.websamsung.netUsing URL Connecting to the cameraConnecting via URL If the Http port is other than Normally, you wouldAdministrator ID, admin, is fixed and can not be changed LoginTo check the Ddns address For Windows XP Service Pack 2 users Installing ActiveXPopup setting as follows Current siteAUsing the Live Screen To capture the snapshot BackupTo record a video To print out the screenshotClick on the scene to record Web viewer Sd Search Viewer Screen layout Using ThE Sd SEARCh Viewer ScreenDefault Setup Accessing the Setup screenTo configure the video & audio settings  Contrast Adjust the contrast fromTo configure the IP settings Differently with each other To set the user account Click Basic User User setup window appearsTo set the display language When done, click Apply Selected language will be appliedClick Basic Language To set the date/time PC time configuration settingsTo time To check the log information To update the softwareSelect system log Log information list appears To set the Https To reset the systemTo Set IP Filtering Overlay SetupTo set the text Form of https//CameraIPTo set the event transfer function Event SetupProvider To test the FTP transfer Click TestSetup screen To set an alarm image To setup the recordTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the video transfer mode Network SetupTo set the Ddns ALC DAY ModeLens Level Backlight Night BurstCavlc Terminology Bitrate Control CBRConstant Bitrate English Specifications RAM CS/CDSP 4CIFHTTPS, SSL, Dhcp SetupARP, DNS, DDNS, Vsip DdnsHttp API NtscSDK Frame Rate Ntsc  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1MPEG4 4CIF EstimationHPel264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution NTP must be properly configured  Verify the settings in the following sequenceAlarm Video Transmission must be enabled Analysis settingPreamble GNU General Public License GPL S/W  Lgpl S/WProgram, and can be reasonably Page Page No Warranty GNU General Public License You must show them these terms so they know their rights Terms and ConditionsBasic Permissions Source CodeProtecting Users Legal Rights From Anti-Circumvention Law Conveying Non-Source Forms Conveying Verbatim CopiesPage Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents Use with the GNU Affero General Public License GNU Lesser General Public License Disclaimer of WarrantyLimitation of Liability END of Terms and ConditionsPreamble Page AThe modified work must itself be a software library Page Page Page No Warranty No Event Shall the OpenSSL OpenSSL LicenseOriginal SSLeay License